Stephen Boedo

College of Art and Design College of Engineering Technology College of Health Sciences and Technology College of Liberal Arts College of Science Golisano College of Computing and Information Sciences International Campuses Kate Gleason College of Engineering National Technical Institute for the Deaf School of Individualized Study

Stephen Boedo

Professor
Kate Gleason College of Engineering
Mechanical Engineering

2023 Submissions

Journal Paper

Boedo, S. and V.N. Santhanam. "Optimal Shape Design of Spherical Squeeze Film Bearings using Genetic Algorithms." Tribology International 190. (2023): 109058. Print. *

2022 Submissions

Journal Paper

Boedo, S. "Mass Conserving Analysis of Steadily Loaded, Oscillating Elliptical Journal Bearings." Tribology International 176. (2022): 107921. Print. *

Boedo, S. "A Computationally Efficient, Mass Conserving Generalized Short Bearing Formulation for Dynamically Loaded Journal Bearings." ASME Journal of Tribology 144. (2022): p. 051802. Print. *

Boedo, S. and T. M. Blais. "Revisiting Mobility-Based Predictions of Cyclic Minimum Film Thickness in Big-End Connecting Rod Bearings." SAE International Journal of Engines 15. (2022): 263-281. Print. «

Boedo, S. "Mass Conserving Analysis of Steadily Loaded, Oscillating Partial Arc Journal Bearings Using a Generalized Warner Bearing Formulation." ASME Journal of Tribology 144. (2022): 101801. Print. *

2021 Submissions

Journal Paper

Boedo, S. "Concise Data Set Formulation for Dynamically Loaded Conformal Elastohydrodynamic Lubrication Problems." ASME Journal of Tribology 143. (2021): 61802. Print. £

2020 Submissions

Journal Paper

Boedo, S. "Singularity Functions Revisited: Clarifications and Extensions for Construction of Shear-Moment Diagrams in Beams." International Journal of Mechanical Engineering Education 48. (2020): 351-370. Print. «

Published Conference Proceedings

Boedo, S. "Singularity Functions Revisited: Clarifications and Extensions for the Deflection of Beams of Non-Uniform Flexural Rigidity under Arbitrary Loading." Proceedings of the 2020 ASEE St. Lawrence Section Annual Conference. Ed. S. Gupta. Rochester, NY: n.p., 2020. Web. *

2018 Submissions

Journal Paper

Booker, J.F. and S. Boedo. "Nodal Unsteady Inverse EHL: Axisymmetric Normal Approach." ASME Journal of Tribology 140. (2018): 41501. Print. *

Boedo, S. and J.F. Booker. "Erratum: Warner-Sommerfeld Impedance and Mobility Maps." ASME Journal of Tribology 140. (2018): 17001. Print. *

Boedo, S. and J.F. Booker. "Discussion of “A General Model for Liquid and Gas Lubrication, Including Cavitation” by N. Brunetière." ASME Journal of Tribology 140. (2018): 55501. Print. *

Booker, J.F. and S. Boedo. "Closure of the Paper “Nodal Unsteady Inverse EHL: Axisymmetric Normal Approach,”." ASME Journal of Tribology 140. (2018): 66001. Print. *

Journal Editor

Boedo, S., ed. ASME Journal of Tribology. New York: American Society of Mechanical Engineers, 2018. Print. *

2017 Submissions

Journal Paper

Boedo, S. and S.A. Coots. "Wear Characteristics of Conventional and Squeeze-Film Artificial Hip Joints." ASME Journal of Tribology 139. 3 (2017): 1-10. Print. £

Boedo, S. "Formation of Dynamic Reconfigurable Electric Field Gradients in Thin Lubricant Films through Transient Elastohydrodynamic Squeeze Film Action." Tribology International 116. (2017): 329-337. Print. £

Journal Editor

Boedo, S., ed. ASME Journal of Tribology. New York: American Society of Mechanical Engineers, 2017. Print.

Full Patent

Boedo, S. and J.F. Booker. "Artificial Hip Joint Replacement System." U.S. Patent 9,642,709. 9 May 2017.

2016 Submissions

Journal Paper

Boedo, S. and D.P. Anderson. "Oscillating Journal Bearings under Steady Load: A Numerical Study of Limiting Cases." ASME Journal of Tribology 138. (2016): p. 014502. Print. *

Boedo, S. and J.F. Booker. "Warner-Sommerfeld Impedance and Mobility Maps." ASME Journal of Tribology 138. (2016): p. 034502. Print. *

Holzenkamp, M., et al. "Seeded Fault Testing and Classification of Dynamically-Loaded Floating Ring Compressor Bearings." ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering 2. (2016): p. 021003. Print. *

2015 Submissions

Journal Paper

Boedo, S. "Transient Dynamics of the Conformal Elastohydrodynamic Squeeze Film Problem." ASME Journal of Tribology 137. (2015): 041506 (12 pp). Print. * £

2014 Submissions

Journal Paper

Demiri, S., S. Boedo, and L.S. Holsen. "Wear Characteristics of Large Aspect Ratio Silicon Microbearing Systems." Wear 312. (2014): 58-69. Print. * £

Boedo, S. and J.F. Booker. "A Novel Elastic Squeeze Film Total Hip Replacement." ASME Journal of Tribology 136. (2014): 11101. Print. * £

Published Conference Proceedings

Coots, S.A. and S. Boedo. "Wear Assessment of a Novel Squeeze-Film Artificial Hip Joint." Proceedings of the 2014 Effective Access Technology Conference, Rochester, NY, June 17-18, 2014. Ed. RIT. Rochester, NY: n.p., Print. *

Invited Keynote/Presentation

Coots, S.A. and S. Boedo. "Wear Assessment of a Novel Squeeze-Film Artificial Hip Joint." 2014 Effective Access Technology Conference. RIT. Rochester, NY. 17 Jun. 2014. Conference Presentation. ∆

Boedo, S. and J.F. Booker. "A Novel Elastic Squeeze Film Total Hip Replacement." University Technology Showcase, Center for Emerging and Innovative Sciences (CEIS). RIT. Rochester, NY. 10 Apr. 2014. Conference Presentation. ∆

2013 Submissions

Journal Paper

Boedo, S. "A Hybrid Mobility Solution Approach for Dynamically Loaded Misaligned Journal Bearings." ASME Journal of Tribology 135. (2013): 24501. Print. *

Boedo, S. "A Corrected Displacement Solution to Linearly Varying Surface Pressure Over a Triangular Region on the Elastic Half Space." Tribology International 60. (2013): 116-118. Print. *

Published Conference Proceedings

Kasemer, M., E.A. DeBartolo, and S. Boedo. "Laboratory and Classroom Study of Low Cycle Fatigue." Proceedings of the ASEE 2013 Annual Conference and Exposition, June 23-26, 2013, Atlanta, GA. Ed. ASEE. Washington, DC: n.p., Print. *

Holzenkamp, M., et al. "An Experimentally Validated Model for Reciprocating Compressor Main Bearings for Applications in Health Monitoring." Proceedings of the 2013 ASME Dynamic Systems and Control Conference, October 21-23, 2013, Stanford University, Palo Alto, CA. Ed. ASME. New York, NY: n.p., Print. *

Demiri, S., S. Boedo, and L.S. Holsen. "Wear Assessment of Large Aspect Ratio Silicon Microbearing Systems." Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition, November 13-21, 2013, San Diego, CA, Paper IMECE2013-64420. Ed. ASME. New York, NY: n.p., Print. *

Boedo, S., J.F. Booker, and S.A. Coots. "Swing Phase Lubrication Analysis of a Novel Artificial Hip Joint." Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition, November 13-21, 2013, San Diego, CA, Paper IMECE2013-64356. Ed. ASME. New York, NY: n.p., Print. *

Invited Paper

Boedo, S. "Improving Design of Artificial Hips." Research at RIT. (2013). Print. ∆

Invited Keynote/Presentation

Boedo, S. "Principles of Lubrication." Technical Review Meeting. Torvec Inc. Rochester, NY. 18 Jul. 2013. Guest Lecture.

Boedo, S. "Principles of Elastohydrodynamics." Technical Review Meeting. Trane Corporation. La Crosse, WI. 28 Feb. 2013. Guest Lecture.

2012 Submissions

Published Conference Proceedings

Boedo, S. "A Hybrid Mobility Solution Method for Dynamically Loaded Misaligned Journal Bearings." Proceedings of the ASME/STLE 2012 International Joint Tribology Conference, Denver, CO, October 8-10, 2012, Paper IJTC2012-61225. Ed. ASME. New York, NY: n.p., 2012. Print. £

Invited Keynote/Presentation

Boedo, S. and J.F. Booker. "A Novel Approach to Artificial Hip Joint Design." ASME/STLE 2012 International Joint Tribology Conference, Paper IJTC2012-61236. ASME. Denver, CO. 8 Oct. 2012. Conference Presentation. £

Kasemer, M., E.A. DeBartolo, and S. Boedo. "Laboratory Activities to Illustrate the Importance of Low Cycle Fatigue and Linear Elastic Fracture Mechanics." 2012 RIT Undergraduate Research Symposium. RIT. Rochester, NY. 10 Aug. 2012. Conference Presentation. †

Boedo, S. and J.F. Booker. "An Elastic Squeeze Film Total Hip Replacement." Cornell Technology Venture Forum. Cornell University. Ithaca, NY. 25 Oct. 2012. Conference Presentation. ∆

Boedo, S. "Principles of Lubrication." Technical Review Meeting. Achates Power Inc. San Diego, CA. 14 Jun. 2012. Guest Lecture. ∆

Boedo, S. and J.F. Booker. "An Elastic Squeeze Film Total Hip Replacement." Celebration of Research: Effective Access Technology Program. RIT. Rochester, NY. 16 Nov. 2012. Conference Presentation. ∆

2011 Submissions

Journal Paper

Boedo, S. "Mass Conserving Cavitation Effects in Squeeze-Film Journal Bearings Subjected to Sinusoidal Loads." STLE Tribology Transactions 54. (2011): 21-35. Print. *

Boedo, S. and W.J. Grande. "Structurally Compliant Microbearing Devices and Methods Thereof." U.S. Patent 8,037,777. (2011): 1-13. Print. £

2010 Submissions

Published Article

Demiri, S., S. Boedo, and W.J. Grande. “Conformality Effects on the Wear of Low-Speed, Large Aspect Ratio Silicon Journal Microbearings.” Wear, 268.3-4 (2010): 361-372. Web. "  É  *

Booker, J.F., S. Boedo, and D. Bonneau. “Conformal EHL Analysis for Engine Bearing Design: A Brief Review.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224.12 (2010): 2648-2653. Web. *

Boedo, S., “Mass Conserving Cavitation Effects in Squeeze-Film Journal Bearings Subjected to Fully Reversing Loads.” Proceedings of the STLE/ASME International Joint Tribology Conference, 17-20 Oct. 2010. 1-3. Web. *

Demiri, S., and S. Boedo. “Clearance Effects on the Impact Behavior of Large Aspect Ratio Silicon Journal Microbearings.” Proceedings of the STLE/ASME International Joint Tribology Conference, 17-20 Oct. 2010. 1-3. Web. "  É  *

Boedo, S. “Practical Tribological Issues in Big End Bearings.” Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications, and Future Trends, 2010. 615-634. Print. *