Salman Pervaiz

College of Art and Design College of Engineering Technology College of Health Sciences and Technology College of Liberal Arts College of Science Golisano College of Computing and Information Sciences International Campuses Kate Gleason College of Engineering National Technical Institute for the Deaf School of Individualized Study

Salman Pervaiz

International Campuses
RIT Dubai

2022 Submissions

Journal Paper

Abdallah, Said, et al. "CONVENTIONAL MACHINING OF SINGLE CRYSTAL METALS AND SUPER ALLOYS: A REVIEW." ASME Journal of Manufacturing Science and Engineering. (2022): 1-34. Print. *

Pervaiz, Salman, et al. "Machinability analysis of dry and liquid nitrogen–based cryogenic cutting of Inconel 718: experimental and FE analysis." International Journal of Advanced Manufacturing Technology 118. (2022): 3801–3818. Print. *

Ali, Shafahat, Said Abdallah, and Salman Pervaiz. "Predicting Cutting Force and Primary Shear Behavior in Micro-Textured Tools Assisted Machining of AISI 630: Numerical Modeling and Taguchi Analysis." Micromachines 13. 1 (2022): 91. Print. *

Yousefi, Mohammad and Salman Pervaiz. "3D Finite element modeling of wear effects in the punching process." Simulation Modelling Practice and Theory 114. (2022): 102415. Print. *

2021 Submissions

Journal Paper

Khan, Sarmad Ali, et al. "Exploring the feasibility of novel coated wires in wire EDM of Ti-6Al-4 V aerospace alloy: a case of multi-pass strategy." Journal of the Brazilian Society of Mechanical Sciences and Engineering volume 43. (2021): 273. Print. *

Kannan, S., et al. "An Energy-Based Analysis for Machining Novel AZ91 Magnesium Composite Foam Dispersed With Ceramic Microspheres." ASME Journal of Manufacturing Science and Engineering 143. 3 (2021): 31007. Print. *

Published Conference Proceedings

Abdallah, Said and Salman Pervaiz. "Reviewing Post-Processing Techniques to Enhance Mechanical Properties of Parts Fabricated Using WAAM." Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition. Ed. Chetan Nikhare. Virtual, USA: ASME, 2021. Print. *

Ali, Shafahat, Salman Pervaiz, and Sathish Kannan. "Current Research Trends in Variants of Minimum Quantity Lubrication (MQL): A Review." Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition. Ed. Chetan Nikhare. Virtual, USA: ASME, 2021. Print. *

Lewis, Jonathan and Salman Pervaiz. "A Numerical Study to Investigate Machining Aspects of Convex Surface Drilling." Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition. Ed. Chetan Nikhare. Virtual, USA: ASME, 2021. Print. *

Singh, Aman Preet and Salman Pervaiz. "Current Status and Prospects of Multi-Jet Fusion (MJF) Based 3D Printing Technology." Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition. Ed. Chetan Nikhare. Virtual, USA: ASME, 2021. Print. *

2020 Submissions

Journal Paper

Kannan, S., et al. "Machining of novel AA7075 foams containing thin-walled ceramic bubbles." Materials and Manufacturing Processes 35. 16 (2020): 1812-1821. Print. *

2019 Submissions

Journal Paper

Pervaiz, S., et al. "Role of Energy Consumption, Cutting Tool and Workpiece Materials Towards Environmentally Conscious Machining: A Comprehensive Review." Proc IMechE Part B: Journal of Engineering Manufacture. (2019): 1-20. Print. *

Ishfaq, K., et al. "Exploring the Contribution of Unconventional Parameters on Spark Gap Formation and its Minimization During WEDM of Layered Composite." The International Journal of Advanced Manufacturing Technology 102. (2019): 1659–1669. Print. *

Ahmed,, N., et al. "EDM of Ti-6Al-4V: Electrode and Polarity Selection for Minimum Tool Wear rate and Overcut." Materials and Manufacturing Processes 34. 7 (2019): 769-778. Print. *

Ahmed, N., M. Rafaqat, and S. Pervaiz et al. "Controlling the Material Removal and Roughness of Inconel 718 in Laser Machining." Materials and Manufacturing Processes 34. 10 (2019): 1169-1181. Print. *

Ishfaq,, K, et al. "Abrasive Waterjet Cutting of Cladded Material: Kerf Taper and MRR Analysis." Materials and Manufacturing Processes 34. 5 (2019): 544-553. Print. *

Pervaiz, S., et al. "Recent Advances in the Machining of Titanium Alloys using Minimum Quantity Lubrication (MQL) Based Techniques." International Journal of Precision Engineering and Manufacturing-Green Technology 6. (2019): 133-145. Print. *

Ahmed, N., S. Pervaiz, and S. Ahmad et al. "LBM of Aluminum Alloy: Towards a Control of Material Removal and Roughness." The International Journal of Advanced Manufacturing Technology 105. (2019): 1901–1915. Print. *

Zia, M. K., et al. "Reviewing Sustainability Interpretation of Electrical Discharge Machining Process using Triple Bottom Line Approach." International Journal of Precision Engineering and Manufacturing-Green Technology 6. (2019): 931–945. Print. *

Book Chapter

Pervaiz, S., et al. "Numerical Modeling of Charpy Impact Test to Determine the Fracture Characteristics of Aluminium Alloy 6061." Fracture, Fatigue, Failure and Damage Evolution. Ed. Carroll J., et al. Cham, SWITZERLAND: Springer, Cham, 2019. 85-88. Web. *

Published Conference Proceedings

Ibrahim, A., A. A. Warsame, and S. Pervaiz. "Finite Element (FE) Assisted Investigation of the Compliant Mechanism Made of Various Polymeric Materials." Proceedings of the 2nd International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT) 2019. Ed. Karthikeyan Ram. Dubai, United Arab Emirates: Elsevier – Materials Today: Proceedings, Print. *

Nouzil, I., S. Pervaiz, and S. Kannan. "Numerically Constructed Energy Consumption Mapping for the Orthogonal Machining of Ti6Al4V." Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE) 2019. Ed. Alberto Cuitino (Technical Program Chair). Salt Lake City, Utah: ASME, Print. *

Ghoshal, A., et al. "Reviewing Machinability of Fibre-Reinforced Polymer (FRP)/ Metallic Stacks Using MQL." Proceedings of the Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE) 2019. Ed. Alberto Cuitino (Technical Program Chair). Salt Lake City, Utah: ASME, Print. *

Pervaiz, S., A. Daneji, and S. Kannan. "Numerical Simulation of Orbital Drilling Process of Ti6Al4V." Proceedings of the Proceedings of the Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE) 2019. Ed. Alberto Cuitino (Technical Program Chair). Salt Lake City, Utah: ASME, Print. *

2018 Submissions

Journal Paper

Anwar, Saqib, et al. "Electron Beam Melting of Gamma Titanium Aluminide and Investigating the Effect of EBM Layer Orientation on Milling Performance." The International Journal of Advanced Manufacturing Technology 96. 9-12 (2018): 3093–3107. Web. *

Pervaiz, Salman, Sathish Kannan, and Hossam Kishawy. "An Extensive Review of the Water Consumption and Cutting Fluid-based Sustainability Concerns in the Metal Cutting Sector." Journal of Cleaner Production 197. (2018): 134-153. Web. *

2017 Submissions

Journal Paper

Ahmed, Naveed, et al. "Integrating Electron Beam Melting and Rotary Ultrasonic Machining to Improve Surface Finish of Titanium Alloy." International Journal of Advanced Manufacturing Technology 92. 9-12 (2017): 3349—3361. Print. *

Pervaiz, Salman, et al. "A numerical and experimental study to investigate convective heat transfer and associated cutting temperature distribution in single point turning." International Journal of Advanced Manufacturing Technology 94. 1-4 (2018): 897—910. Print. *

Anwar, Saqib, et al. "A study on the effect of main process parameters of rotary ultrasonic machining for drilling BK7 glass." Advances in Mechanical Engineering 10. 1 (2018): 1-12. Print. *

2016 Submissions

Journal Paper

Pervaiz, Salman, Ibrahim Deiab, and Hossam Kishawy. "A finite element based energy consumption analysis for machining AISI 1045 carbon steel using uncoated carbide tool." Journal of Advances in Materials and Processing Technologies (Taylor & Francis) 2. 1 (2016): 83-92. Print. *

Pervaiz, Salman, et al. "An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V)." The International Journal of Advanced Manufacturing Technology 87. 5 (2016): 1371—1386. Print. *

Sharif, Muhammed Nadeem, Salman Pervaiz, and Ibrahim Deiab. "Potential of alternative lubrication strategies for metal cutting processes: a review." The International Journal of Advanced Manufacturing Technology. (2016): 1-33. Print. *

Published Conference Proceedings

Pervaiz, Salman, Hossam Kishawy, and Ibrahim Deiab. "Sustainable Machining of High Performance Titanium "ŽAlloys." Proceedings of the "Ž8th AUS-IMS International Conference on Materials Science and Engineering "Ž. Ed. Dr. Adil Al-Tamimi and Dr. Taleb Ibrahim. Sharjah, United Arab Emirates: n.p., 2016. Print. *

Pervaiz, Salman and Mohamed Gadalla. "Exergy Analysis of Metal Cutting Processes." Proceedings of the ASME 2016 - International Mechanical Engineering Congress and Exposition (IMECE). Ed. Ramakrishna Koganti (ASME General Chair). Phoenix, Arizona, US: ASME, 2016. Print. *