Bing Yan Headshot

Bing Yan

Assistant Professor

Department of Electrical and Microelectronic Engineering
Kate Gleason College of Engineering

585-475-2655
Office Location

Bing Yan

Assistant Professor

Department of Electrical and Microelectronic Engineering
Kate Gleason College of Engineering

Education

B.S. in information management and information system from Renmin University of China in 2010; M.S. degrees in electrical engineering and statistics from University of Connecticut in 2012 and 2017, respectively; Ph.D. degrees in electrical engineering from University of Connecticut in 2016.

Bio

Dr. Bing Yan is currently an assistant professor in the Department of Electrical and Microelectronic Engineering at Rochester Institute of Technology. She received the B.S. degree in information management and information system from Renmin University of China in 2010, M.S. degrees in electrical engineering and statistics from University of Connecticut in 2012 and 2017, respectively, and Ph.D. degrees in electrical engineering from University of Connecticut in 2016. Before joining Rochester Institute of Technology, she was an assistant research professor in the Department of Electrical and Computer Engineering, University of Connecticut. Dr. Yan’s research interests include power system optimization, grid integration of renewables (wind and solar), operation optimization of microgrids and distributed energy systems, scheduling of manufacturing systems, and mixed integer linear programming optimization. Dr. Yan has been working on many projects collaborated with industrial partners over the years, resulting in more than 30 peer-reviewed articles.  Either as PI, Co-PI or Senior Personnel, Dr. Yan has three grants from the National Science Foundation including the Faculty Early Career Development Program (CAREER) Award, one grant from the Department of Energy, and multiple contracts from Brookhaven National Laboratory under the Department of Energy, ISO-New England, Mid-Continent ISO, National Cheng Kung University, and ABB. 

Currently Teaching

EEEE-281
3 Credits
Covers basics of DC circuit analysis starting with the definition of voltage, current, resistance, power and energy. Linearity and superposition, together with Kirchhoff's laws, are applied to analysis of circuits having series, parallel and other combinations of circuit elements. Thevenin, Norton and maximum power transfer theorems are proved and applied. Circuits with ideal op-amps are introduced. Inductance and capacitance are introduced and the transient response of RL, RC and RLC circuits to step inputs is established. Practical aspects of the properties of passive devices and batteries are discussed, as are the characteristics of battery-powered circuitry. The laboratory component incorporates use of both computer and manually controlled instrumentation including power supplies, signal generators and oscilloscopes to reinforce concepts discussed in class as well as circuit design and simulation software.
EEEE-499
0 Credits
One semester of paid work experience in electrical engineering.
EEEE-522
3 Credits
This course deals with the topics related to electric power transmission and distribution. Topics covered in this course include: Three Phase System – Wye and Delta connections, Transformers – equivalent circuit –performance characteristics, Balanced and Unbalanced System Analysis, Transmission and Distribution Line Design Considerations, Transmission Line Protection, Transmission Line Faults and Fault Analysis.
EEEE-524
3 Credits
This course will introduce the details of electric power markets and the techniques to better use the available resources. Topics include the description of steam generation and renewable energy sources. Formulation of the cost associated with the generation and the optimization methods to minimize this cost in the economic dispatch problem. Unit commitment. Optimal power flow formulation and its solution methods. Introduction to smart grid technologies and challenges.
EEEE-622
3 Credits
This course deals with the topics related to electric power transmission and distribution. Topics covered in this course include: Three Phase System – Wye and Delta connections, Transformers – equivalent circuit –performance characteristics, Balanced and Unbalanced System Analysis, Transmission and Distribution Line Design Considerations, Transmission Line Protection, Transmission Line Faults and Fault Analysis.
EEEE-624
3 Credits
This course will introduce the details of electric power markets and the techniques to better use the available resources. Topics include the description of steam generation and renewable energy sources. Formulation of the cost associated with the generation and the optimization methods to minimize this cost in the economic dispatch problem. Unit commitment. Optimal power flow formulation and its solution methods. Introduction to smart grid technologies and challenges.
ENGR-899
3 Credits
This course is used by students who plan to study a topic on an independent study basis. The student and instructor must prepare a plan of study and method of evaluation for approval by the program director prior to course registration.
MATH-495
1 - 3 Credits
This course is a faculty-directed project that could be considered original in nature. The level of work is appropriate for students in their final two years of undergraduate study.