Faculty Scholarship 2017

Mechanical Engineering

To view listing from a different department, select department name from the right.

Margaret Bailey

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Published Conference Proceedings

Marchetti, Carol, et al. "No More Duct Tape! Institutionalization of ADVANCE Initiatives." Proceedings of the 2017 ASEE Annual Conference and Exposition. Ed. ASEE. Columbus, OH: n.p., 2017. Web. «

Dell, Elizabeth, et al. "Career Navigation Initiatives for Women STEM Faculty in Support of Institutional Transformation." Proceedings of the 2017 ASEE Annual Conference and Exposition. Ed. ASEE. Columbus, OH: n.p., 2017. Web. «

Invited Keynote/Presentation

Bailey, Margaret B., et al. "Reimagining and Refining Campus Cultures: Promoting Inclusivity through Organizational Development Initiatives." NSF ADVANCE Annual PI Meeting. NSF ADVANCE. Washington, DC. 9 Oct. 2017. Address. ≠

Bailey, Margaret B. "Organizational Benefits of Implementing Gender Equality: Measuring and Demonstrating Impact." STEM Gender Equality Congress. Science Impact Ltd. Berlin, Germany. 9 Jun. 2017. Address. £

Bailey, Margaret B. "Using Public Policy Strategies to Drive Change in Thermodynamic Instruction/Research & within the Academic Workplace." Public Policy Discussion and Dinner Series. College of Liberal Arts, RIT. Rochester, New York. 12 Mar. 2017. Keynote Speech.

View All Submissions

Stephen Boedo

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Boedo, S. and S.A. Coots. "Wear Characteristics of Conventional and Squeeze-Film Artificial Hip Joints." ASME Journal of Tribology 139. 3 (2017): 1-10. Print. £

Boedo, S. "Formation of Dynamic Reconfigurable Electric Field Gradients in Thin Lubricant Films through Transient Elastohydrodynamic Squeeze Film Action." Tribology International 116. (2017): 329-337. Print. £

Journal Editor

Boedo, S., ed. ASME Journal of Tribology. New York: American Society of Mechanical Engineers, 2017. Print.

Full Patent

Boedo, S. and J.F. Booker. "Artificial Hip Joint Replacement System." U.S. Patent 9,642,709. 9 May 2017.

View All Submissions

Ke Du

Research Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Du, Ke, et al. "Selective hierarchical patterning of silicon nanostructures via soft nanostencil lithography." Nanotechnology. (2017): 465303. Print. *

Jiang, Youhua, et al. "Nanotexturing of Conjugated Polymers via One-Step Maskless Oxygen Plasma Etching for Enhanced Tunable Wettability." Langmuir. (2017): 6885-6894. Print. *

Chauvin, Adrien, et al. "Large-Scale Fabrication of Porous Gold Nanowires via Laser Interference Lithography and Dealloying of Gold–Silver Nano-Alloys." Micromachines. (2017): 168. Web. *

Du, Ke, et al. "Multiplexed efficient on-chip sample preparation and sensitiveamplification-free detection of Ebola virus." Biosensors and Bioelectronics. (2017): 489-496. Print. *

Invited Paper

Du, Ke, et al. "Sub-10 nm patterning with DNA nanostructures: a short perspective." Nanotechnology. (2017). Print. *

Du, Ke, Ishan Wathuthanthri, and Chang-Hwan Choi. "The Rise of scalable micro/nanopatterning." Micromachines. (2017). Web. *

Du, Ke, et al. "Stencil Lithography for Scalable Micro- and Nanomanufacturing." Micromachines. (2017). Web. *

View All Submissions

Alfonso Fuentes Aznar

Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Gonzalez-Perez, Ignacio and Alfonso Fuentes-Aznar. "Analytical Determination of Basic Machine-Tool Settings for Generation of Spiral Bevel Gears and Compensation of Errors of Alignment in the Cyclopalloid System." International Journal of Mechanical Sciences 120. (2017): 91-104. Print. £

Fuentes-Aznar, Alfonso, Ramon Ruiz-Orzaez, and Ignacio Gonzalez-Perez. "Numerical Approach for Determination of Rough-Cutting Machine-Tool Settings for Fixed-Setting Face-Milled Spiral Bevel Gears." Mechanism and Machine Theory 112. (2017): 22-42. Print. £

Gonzalez-Perez, Ignacio and Alfonso Fuentes-Aznar. "Implementation of a Finite Element Model for Stress Analysis of Gear Drives Based on Multi-Point Constraints." Mechanism and Machine Theory 117. (2017): 35-47. Print. £

Book Chapter

Fuentes-Aznar, Alfonso, Scott Eisele, and Ignacio Gonzalez-Perez. "Computerized Simulation of Manufacturing Errors in Cylindrical Spur Gears and Their Compensation Through Flank Modifications." Advanced Gear Engineering. Ed. Veniamin Goldfarb, Evgenii Trubachev, and Natalya Barmina. Switzerland, EU: Springer International Publishing, 2017. 1-26. Print.

Published Conference Proceedings

Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Gear Tooth Strength Analysis of High Pressure Angle Cylindrical Gears." Proceedings of the 2017 AGMA Fall Technical Meeting. Ed. AGMA. Alexandria, VA: American Gear Manufacturers Association, 2017. Print. £

Gonzalez-Perez, Ignacio and Alfonso Fuentes-Aznar. "Comparison of Cyclo-Palloid and Cyclo-Cut Cutting Methods for Generation of Spiral Bevel Gears." Proceedings of the ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Ed. ASME. Cleveland, OH: American Society of Mechanical Engineers, 2017. Print. ˜

Guo, Hong, et al. "Friction and Wear Properties of Halogen-Free and Halogen-Containing Ionic Liquids Used as Neat Lubricants, Lubricant Additives and Thin Lubricant Layers." Proceedings of the ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Ed. ASME. Cleveland, OH: American Society of Mechanical Engineers, 2017. Print. ˜

Invited Paper

Fuentes-Aznar, Alfonso, Harish K. Pasapula, and Ignacio Gonzalez-Perez. "Ingranaggi Conici a Denti Dritti con Profili Ottimizzati." Organi di Transmissione. (2017). Print.

Peer Reviewed/Juried Poster Presentation or Conference Paper

Artoni, Alessio, et al. "Robust Design of Face-Milled Spiral Bevel Gears for Minimum Noise and Maximum Load Capacity with Stochastic Misalignments." Proceedings of the ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. Ed. ASME. Cleveland, OH: American Society of Mechanical Engineers. ˜

Invited Article/Publication

Fuentes-Aznar, Alfonso, Ignacio Gonzalez-Perez, and Harish K. Pasapula. "Computerized Design of Straight Bevel Gears with Optimized Profiles for Forging, Molding, or 3D Printing." Thermal Processing. (2017). Print.

View All Submissions

Hany Ghoneim

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Published Conference Proceedings

Chokshi, K. and H. Ghoneim. "A Flexible-Matrix-Composite Hydraulic Engine Mount." Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition. Ed. Stephen D. Tse. Tampa, FL: ASME, 2017. Print. «

Rutuja, Joshi S. and H. Ghoneim. "Nonlinear Finite Element Analysis of Radial Lip Seals." Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition. Ed. Stephen D. Tse. Tampa, FL: ASME, 2017. Print. «

View All Submissions

Surendra Gupta

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Gupta, S.K., et al. "Vacuum UV Photo-Oxidation of Poly(Ethylene Terephthalate)." Journal of Adhesion Science and Technology 31. 23 (2017): 2542-2554. Print. ˜

View All Submissions

Edward Hensel Jr.

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Y, Youn O Lee, et al. "Examining Daily Electronic Cigarette Puff Topography Among Established and Non-established Cigarette Smokers in their Natural Environment." Nicotine Tobacco Research 10. (2017): 1-10. Web. *

Published Conference Proceedings

Hensel, Edward C and Risa J. Robinson. "Interdisciplinary Research Methods: Enhancing Professional Skills of Engineering Ph.D. Students." Proceedings of the LACCEI International Multi-Conference 2017: “Global Partnerships for Development and Engineering Education". Ed. LACCEI. Boca Raton, FL: LACCEI, 2017. Web. *

Strand, A.J., R. Kehn, and E.C. Hensel. "Mixing in Single Phase Systems." Proceedings of the 2017 AIChE Annual Meeting. Ed. AICHE. Minneapolis, MN: AICHE, 2017. Web. *

View All Submissions

Patricia Iglesias Victoria

Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Saurin, N., et al. "Carbon Nanophases in Ordered Nanofluid Lubricants." Wear. 2017 WOM special issue (2017): 747-755. Web. «

Saurin, N., et al. "Carbon Nanophases in Ordered Nanofluid Lubricants." Wear 376-377. (2017): 747-755. Web. «

E.Cigno, , et al. "Lubricating Ability of Two Phosphonium-Based Ionic Liquids as Additives of a Bio-Oil for use in Wind Turbines Gearboxes." Wear 376-377. (2017): 747-755. Web. «

Published Conference Proceedings

A.Tock, , et al. "Wear Performance of New Textured Surfaces Created by Modulation Machining." Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition IMECE2017. Ed. ASME. Tampa, FL: ASME, 2017. Web. «

Guo, H., et al. "Wear Performance of New Textured Surfaces Created By Modulation Machining." Proceedings of the Power Transmission and Gear Conference, ASME 2017 IDETC/CIE. Ed. ASME. Cleveland, OH: ASME, 2017. Web. «

Kothuru, A., et al. "Wear Performance of New Textured Surfaces Created By Modulation Machining." Proceedings of the Power Transmission and Gear Conference, ASME 2017 IDETC/CIE. Ed. ASME. Cleveland, OH: ASME, 2017. Web. «

Peer Reviewed/Juried Poster Presentation or Conference Paper

Liu, R., et al. "Influence of Micro-Scale Textures on the Lubrication Regime of Frictional Surfaces." Proceedings of the 21th International Conference on Wear of Materials. Ed. WOM 2017. Long Beach, CA: WOM. ˜

Guo, H. and P. Iglesias. "Investigation of Ionic Liquids as Neat Lubricants, Additives of Lubricants and Thin-Film Lubricant Layers." Proceedings of the 21th International Conference on Wear of Materials. Ed. WOM 2017. Long Beach, CA: WOM. ˜

View All Submissions

Satish Kandlikar

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Perez-Raya, I. and S.G. Kandlikar. "Discretization and Implementation of a Sharp Interface Model for Interfacial Heat and Mass Transfer During Bubble Growth." Int. J. Heat Mass Transf. 116 (2018): 30-49. Print. *

Perez-Raya, I. and S.G. Kandlikar. "Discretization and implementation of a sharp interface model for interfacial heat and mass transfer during bubble growth." Int. J. Heat Mass Transf. 116 (2018): 30-49. Web. *

Recinella, A. and S.G. Kandlikar. "Enhanced Flow Boiling Using Radial Open Microchannels With Manifold and Offset Strip Fins." J. Heat Transf. 140. (2017): 111502-111502—7. Print. *

Raghupath, P.A. and S.G. Kandlikar. "Effect of Thermophysical Properties of the Heater Substrate on Critical Heat Flux in Pool Boilin." J. Heat Transf 139. (2017): 111502-111502—7. Print. *

Raghupathi, P.A. and S.G. Kandlikar. "Characterization of Pool Boiling of Seawater and Regulation of Crystallization Fouling by Physical Aberration." Heat Transf. Eng 38. (2017): 1296-1304. Print. *

Raghupathi, P.A. and S.G. Kandlikar,. "Pool boiling enhancement through contact line augmentation." Appl. Phys. Lett 110. (2017): 204101. Print. *

Raghupathi, P.A., et al. "Bubble induced flow field modulation for pool boiling enhancement over a tubular surface." Appl. Phys. Lett 110. (2017): 251603. Print. *

Panse, S.S. and S.G. Kandlikar. "A thermosiphon loop for high heat flux removal using flow boiling of ethanol in OMM with tape." Int. J. Heat Mass Transf 106. (2017): 546-557. Print. *

Kandlikar, S.G. "Enhanced Macroconvection Mechanism With Separate Liquid—Vapor Pathways to Improve Pool Boiling Performance." J. Heat Transf. 139. (2017): 051501-051501-11. Print. *

Kandlikar, S.G., et al. "Infrared imaging technology for breast cancer detection — Current status, protocols and new directions." Int. J. Heat Mass Transf 108. (2017): 2303-2320. Print. *

Kandlikar, S.G. and A. Ganguly,. "Fundamentals of Heat Dissipation in 3D IC Packaging, in: 3D Microelectron. Packag." Springe. (2017): 245-260. Print. *

Kandlikar, S. "Boiling and Two-Phase Flow in Narrow Channels." Handbook of Thermal Science and Engineering. (2017): 1-22. Print. *

Kandlikar,, S., et al. "Special Issue From International Workshop on New Understanding in Nanoscale/Microscale Phase Change Phenomena Held in Trondheim." J. Heat Transf. 139. (2017): 110301-110301—1. Print. *

Jaikumar,, A., et al. "Microscale Morphology Effects of Copper—Graphene Oxide Coatings on Pool Boiling Characteristics." J. Heat Transf. 139. (2017): 111509-111509—11. Print. *

Jaikumar, A. and S.G. Kandlikar. "Coupled Motion of Contact Line on Nanoscale Chemically Heterogeneous Surfaces for Improved Bubble Dynamics in Boiling." Sci. Rep 7. (2017): 15691. Print. *

Jaikumar,, A., S.G. Kandlikar,, and A. Gupta,. "Pool Boiling Enhancement through Graphene and Graphene Oxide Coatings." Heat Transf. Eng. 38. (2017): 1274-1284. Print. *

Jaikumar,, A., et al. "Scale effects of graphene and graphene oxide coatings on pool boiling enhancement mechanisms." Int. J. Heat Mass Transf 109. (2017): 357-366. Print. *

Jaikumar, A. and S.G. Kandlikar. "Pool boiling inversion through bubble induced macroconvection." Appl. Phys. Lett 110. (2017): 94107. Print. *

Gupta, A., et al. "A Multiscale Morphological Insight into Graphene Based Coatings for Pool Boiling Applications." Heat Transf. Eng.. (2017): 0-13. Print. *

Emery,, T.S. and S.G. Kandlikar,. "Pool boiling with four non-ozone depleting refrigerants and comparison with previously established correlations." Exp. Therm. Fluid Sci. 85. (2017): 132-139. Print. *

Published Conference Proceedings

A,, Jaikumar and Kandlikar SG. "Pool Boiling Inversion on Surfaces With Separate Liquid-Vapor Pathways and Enhanced Macroconvection Mechanisms." Proceedings of the International Conference on Nanochannels, Microchannels, and Minichannels. Ed. ASME. Cambridge, MA: n.p., 2017. Print. *

TS,, Emery and Kandlikar SG. "Enhanced Pool Boiling With HFE7000 Over Selectively Sintered Microchannels." Proceedings of the 15th International Conference on Nanochannels, Microchannels, and Minichannels. Ed. ASME. Cambridge, MA: n.p., 2017. Print.

A, Chauhan and Kandlikar SG. "Effect of Liquid Volume on Thermosiphon Loop Performance Using Open Microchannels Manifold for CPU Cooling in Data Center." Proceedings of the ASME 2017 15th International Conference on Nanochannels, Microchannels, and Minichannels. Ed. ASME. Cambridge, MA: n.p., 2017. Print.

Emery, T. S., et al. "CPU cooling with a thermosiphon loop with tapered manifold (OMM),"." Proceedings of the 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm),. Ed. ITherm. Orlando, FL: n.p., 2017. Print.

Rishi, A.M., A. Gupta,, and S.G. Kandlikar. "Electrodeposition of Selective Anions with Non-Electrolyte Bath for Enhancing the Pool Boiling Performance." Proceedings of the 28th International Symposium on Transport Phenomena. Ed. 28th International Symposium on Transport Phenomena. Peradeniya, Sri Lanka: n.p., 2017. Print.

P.Raghupathi,, and S.G. Kandlikar. "Effect of Evaporation Momentum Force on Bubble Departure Trajectory." Proceedings of the 28th International Symposium on Transport Phenomena. Ed. International Symposium on Transport Phenomena. Peradeniya,, Sri Lanka: n.p., 2017. Print.

Jaikumar, A. and S.G. Kandlikar. "Microcavity Augmented Pool Boiling Surfaces." Proceedings of the 28th International Symposium on Transport Phenomena. Ed. International Symposium on Transport Phenomena. Peradeniya, Sri Lanka,: n.p., 2017. Print.

Full Patent

Ganguly, A. and S.G. Kandlikar. "Gas-Cooled 3D IC with Wireless Interconnects." U.S. Patent 20170323843A1. 2017.

Jaikumar, A. and S. G. Kandlikar. "Pool Boiling Enhancement with Feeder Channels Supplying Liquid to Nucleating Regions." U.S. Patent US2017138678A1. 2017.

Provisional Patent

Kandlikar, S.G and C. Patil. "Enhanced Boiling with Selective Placement of Nucleation Sites." U.S. Provisional Patent Application 20170176114A1. 19 Jan. 2018.

Invited Keynote/Presentation

S.G.,, Kandlikar,. "Mentoring Perspective." Workshop Presentation. Norwegian University of Science and Technology. Trondheim, Norway. 20 Jun. 2017. Conference Presentation.

S.G.,, Kandlikar,. "Boiling." Workshop Presentation,. Norwegian University of Science and Technology. Trondheim, Norway. 21 Jun. 2017. Conference Presentation.

S.G, Kandlikar,. "New Understanding in Pool Boiling Mechanism." 28th International Symposium on Transport Phenomena,. International Symposium on Transport Phenomena. Peradeniya,, Sri Lanka. 22 Sep. 2017. Keynote Speech.

S.G.,, Kandlikar,. "New understanding of the heat transfer mechanisms during pool and flow boiling and its application in boiling enhancement." Graduate Seminar. University of California. Meced, CA. 27 Oct. 2017. Guest Lecture.

S.G.,, Kandlikar,. "New Understanding of the Heat Transfer Mechanisms During Pool and Flow Boiling,." Graduate Seminar. University of Minnesota. Minneapolis, MN. 11 Dec. 2017. Guest Lecture.

View All Submissions

Alexander Liberson

Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Liberson, Alexander S., Yashar Vahedein, and David A. Borkholder. "Variational Approach of Constructing Reduced Fluid-Structure Interaction Models in Bifurcated Networks." Proceedings of the 2nd World Congress on Momentum, Heat and Mass Transfer, Barselona. 103 (2017): 1031-1039. Web. *

Liberson, Alexander S. and Steven H. Hesler. "A Unified CFD Based Approach to a Variety of Condensation Processes in a Viscous Turbulent Wet Steam Flow." International journal of Modern Nonlinear Theory and Applications. (2017): 85-96. Print. *

Liberson, Alexander S. "Microscale: Wave Propagations Modeling Using a High Order Gradient Continuum Theory." Dekker Encyclopedia of Nanoscience and Nanotechnology, 3d ed. (2017): 1-6. Print. *

Liberson, Alexander S., Yashar Seyed Vahedein, and David A. Borkholder. "Application of Variational Principle to Form Reduced Fluid-Structure Interaction Models in Bifurcated Networks." Journal of Fluid Flow, Heat and Mass Transfer 4. (2017): 1-9. Print. *

Liberson, Alexander S., et al. "Fluid Structure Interaction Model Analysis of Cerebrospinal Fluid Circulation in Patients With Continuous Flow Left Ventricular Assist Device." Int J Artif Organs. (2017): 1-6. Web. *

View All Submissions

Risa Robinson

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2017 Submissions

Journal Paper

Robinson, R., et al. "Assessing Airflow Sensitivity to Healthy and Diseased Lung Conditions in a Computational Fluid Dynamics Model Validated In Vitro." Journal of Biomechanical Engineering. (2018): 1-49. Print. *

Lee, Youn Ok, et al. "Examining Daily Electronic Cigarette Puff Topography Among Established and Non-established Cigarette Smokers in their Natural Environment." Nicotine and Tobacco Research 10. (2017): 1-10. Web. *

Robinson, R., et al. "Inflammatory Response by Different E-Cigarette Flavoring Chemicals Identified by GC-MS in E-Liquids and E-Vapors on Human Lung Epithelial Cells and Fibroblasts." Applied in Vitro Toxicology. (2017): 28-40. Print. *

Published Conference Proceedings

Robinson, R., et al. "Comparison of Methods For the Capture of E-Cigarette Emissions For the Determination of Constituents Using Gas Chromatography-Mass Spectrometry." Proceedings of the 253rd National Meeting of the American Chemical Society. Ed. R. Robinson. San Francisco, CA: ACS, 2017. Print. *

Robinson, R., et al. ", Computational Assessment of Airflow Sensitivity to Healthy and Diseased Lung Conditions." Proceedings of the Biomedical Engr Society Annual Meeting. Ed. R. Robinson. Phoenix, AZ: BMES, 2017. Print. *

Robinson, R. and Edward Hensel. "Interdisciplinary Research Methods: Enhancing Professional Skills of Engineering,." Proceedings of the 15th LACCEI International Multi-Conference for Engineering, Education, and Technology. Ed. R. Robinson. Boca Raton, FL: LACCEI, 2017. Print. *

View All Submissions