Faculty Scholarship 2018
All Departments
Select a Department from the list on the right to narrow results.Vinay Abhyankar
Associate Professor
Biomedical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Phaneuf, CR, et al. "Ultrasensitive Multi-species Detection of CRISPR-Cas9 by a Portable Centrifugal Microfluidic Platform." Analytical Methods 11. (2018): 559-565. Print. *
Tran, N, et al. "MicroRNA Dysregulational Synergistic Network: Discovering MicroRNA Dysregulatory Modules Across Subtypes in Non-Small Cell Lung Cancers." BMC Bioinformatics 19. (2018): 504. Print. *
Invited Keynote/Presentation
Inyang, E, et al. "In Vitro Characterization of Blood Brain Barrier Permeability Post Microcavitation." Biomedical Engineering Society Annual Meeting October 2018 Atlanta, GA. BMES. Atlanta, GA. 20 Oct. 2018. Conference Presentation. £
Peer Reviewed/Juried Poster Presentation or Conference Paper
Williams, M, et al. "Rapidly Integrated Microfluidic Debubbler." Proceedings of the Biomedical Engineering Society Annual Meeting October 2018. Atlanta, GA. Ed. BMES. Atlanta, GA: n.p.. £
Ahmed, A, et al. "An Automated Process for the Fabrication of Aligned Collagen Substrates with Tunable Fiber Properties." Proceedings of the Biomedical Engineering Society Annual Meeting October 2018. Atlanta, GA. Ed. BMES. Atlanta, GA: n.p.. £
Margaret Bailey
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Full Length Book
Moran, Michael, et al. Fundamentals of Engineering Thermodynamics. 9 ed. Hobokin, NJ: John Wiley & Sons, Inc., 2018. Print. ˜
Moran, Michael, et al. Fundamentals of Engineering Thermodynamics. 9 ed. Hobokin, NJ: John Wiley & Sons, Inc., 2018. Web. ˜
Invited Keynote/Presentation
Diffusion, Science. "Professor Margaret Bailey – Seeds of Change – Promoting STEM Careers for Women." Scientia. Pioneering Approaches to Inclusive Education, Issue 191. Bristol, United Kingdom. 12 Jul. 2018. Address.
Bailey, Margaret B. and Carol Marchetti. "Reimagining and Refining Campus Culture Series: Faculty Salary Equity Studies - Navigating Politics and Potential Pitfalls Webinar." AIM/WEPAN Webinar Series. AIM and WEPAN. Bethlehem, PA. 9 Jan. 2018. Guest Lecture.
Jennifer Bailey
Principal Lecturer
Biomedical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Bailey, Jennifer, Christine Dobie, and David Wick. "Work in Progress: Designing an Introduction to Biomedical Engineering course around a design challenge." Proceedings of the ASEE National Conference, June 2018, Salt Lake City, UT. Ed. ASEE. Salt Lake City, UT: n.p., Web. *
Bailey, Jennifer. "Exploring an Inquiry-based Learning with Peer-teaching Pedagogy in a Physiological Signals Lab Course." Proceedings of the ASEE National Conference, June 2018, Salt Lake City, UT. Ed. ASEE. Salt Lake City, UT: n.p., 2018. Web. *
Stephen Boedo
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Booker, J.F. and S. Boedo. "Nodal Unsteady Inverse EHL: Axisymmetric Normal Approach." ASME Journal of Tribology 140. (2018): 41501. Print. *
Boedo, S. and J.F. Booker. "Erratum: Warner-Sommerfeld Impedance and Mobility Maps." ASME Journal of Tribology 140. (2018): 17001. Print. *
Boedo, S. and J.F. Booker. "Discussion of “A General Model for Liquid and Gas Lubrication, Including Cavitation” by N. Brunetière." ASME Journal of Tribology 140. (2018): 55501. Print. *
Booker, J.F. and S. Boedo. "Closure of the Paper “Nodal Unsteady Inverse EHL: Axisymmetric Normal Approach,”." ASME Journal of Tribology 140. (2018): 66001. Print. *
Journal Editor
Boedo, S., ed. ASME Journal of Tribology. New York: American Society of Mechanical Engineers, 2018. Print. *
Patricia Cyr
Senior Lecturer
Industrial and Systems Engineering
Kate Gleason College of Engineering
2018 Submissions
Invited Keynote/Presentation
Cyr, Patricia A. "Using Multivariate Analysis Methods to Manage Change." 2018 ASQRC Quality COnference. American Society for Quality, Rochester Section. Rochester, NY. 26 Sep. 2018. Conference Presentation.
Steven Day
Professor
Biomedical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Sul, Bora, et al. "Assessing Airflow Sensitivity to Healthy and Diseased Lung Conditions in a Computational Fluid Dynamics Model Validated in vitro." Journal of Biomechanical Engineering 140. 5 (2018): 14. Print. *
Mix, Doran S, et al. "Manufacturing Abdominal Aorta Hydrogel Tissue-Mimicking Phantoms for Ultrasound Elastography Validation." JoVE (Journal of Visualized Experiments). 139 (2018): e57984. Web. *
Hariharan, Prasanna, et al. "Inter-laboratory characterization of the flow field in the FDA blood pump model using particle image velocimetry (PIV)." Cardiovascular Engineering and Technology 9. 4 (2018): 623-640. Print. *
Published Conference Proceedings
Prechtl, Ian R, Steven W Day, and Jason R Kolodziej. "An Acoustic Time-Frequency Approach to Condition Monitoring of Ventricular Assist Devices." Proceedings of the PHM Society Conference. Ed. ?. ?, ?: n.p., 2018. Web. *
Ke Du
Research Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Du, Ke, et al. "Superhydrophobic waveguide: Liquid-core air-cladding waveguide platform for optofluidics." Applied Physics Letters. (2018): 143701. Print. *
Marcos Esterman
Associate Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Esterman, Marcos, et al. "Integrating Lean Principles for the Management of Product Development." Proceedings of the 2018 IISE Engineering Lean and Six Sigma Conference. Ed. IISE. Atlanta, GA: IISE, Web. £
Alfonso Fuentes Aznar
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Gonzalez-Perez, Ignacio, Miguel Martinez-Diaz, and Alfonso Fuentes-Aznar. "Compensacion de los Errores de Alineacion Provocados por las Deflexiones de los Ejes en Transmisiones de Engranajes Conicos Espirales Disenadas con Distintos Tipos de Huella de Contacto." Revista Iberoamericana de Ingenieria Mecanica 22. 2 (2018): 102-119. Print. «
Fuentes-Aznar, Alfonso, Ramon Ruiz-Orzaez, and Ignacio Gonzalez-Perez. "Computational Approach to Design Face-Milled Spiral Bevel Gear Drives with Favorable Conditions of Meshing and Contact." Meccanica 53. 10 (2018): 2669–2686. Print. *
Fuentes-Aznar, Alfonso, Eloy Yague-Martinez, and Ignacio Gonzalez-Perez. "Computerized Generation and Gear Mesh Simulation of Straight Bevel Gears Manufactured by Dual Interlocking Circular Cutters." Mechanism and Machine Theory 122. (2018): 160-176. Print. *
Gonzalez-Perez, Ignacio and Alfonso Fuentes-Aznar. "Implementation of a Finite Element Model for Gear Stress Analysis Based on Tie-Surface Constraints and Its Validation Through the Hertz’s Theory." Journal of Mechanical Design 140. (2018): (023301)1-13. Print. *
Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Gear Tooth Strength Analysis of High Pressure Angle Cylindrical Gears." Gear Solutions. June (2018): 30-38. Print. ∆
Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Resistenza di Ingranaggi Cilindrici con Elevato Angolo di Pressione." Organi di Transmissione. Luglio (2018): 24-31. Print. ∆
Published Conference Proceedings
Gonzalez-Perez, Ignacio, Miguel Martinez-Diaz, and Alfonso Fuentes-Aznar. "Compensacion de los Errores de Alineacion Provocados por las Deflexiones de los Ejes en Transmisiones de Engranajes Conicos Espirales Disenadas con Distintos Tipos de Huella de Contacto." Proceedings of the XXII Congreso Nacional de Ingenieria Mecanica. Ed. Jose I. Pedrero. Madrid, Spain: Asociacion Espanola de Ingenieria Mecanica, 2018. Print. *
Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Integrating Non-Contact Metrology in the Process of Analysis and Simulation of Gear Drives." Proceedings of the AGMA 2018 Fall Technical Meeting. Ed. N/A. Alexandria, VA: American Gear Manufacturers Association, 2018. Print. *
Kini, Sachin, Alfonso Fuentes-Aznar, and Hany Ghoneim. "Composite Fabric Blankets for Plastic Gears." Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE2018). Ed. N/A. Pittsburg, PA: American Society of Mechanical Engineers, 2018. Print. *
Journal Editor
Fuentes-Aznar, Alfonso, ed. Mechanism and Machine Theory. Amsterdam, Netherlands: Elsevier, 2018. Print. *
Thomas Gaborski
Professor
Biomedical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Chung, H.H., et al. "Use of Porous Membranes in Tissue Barrier and Co-culture Models." Lab on a Chip 18. (2018): 1671-1689. Print. *
Chung, H.H., et al. "Extended Live-tracking and Quantitative Characterization of Wound Healing and Cell Migration with SiR-Hoechst." Experimental Cell Research 1. 2 (2018): 198-210. Print. *
Invited Keynote/Presentation
Gaborski, T.R. "Engineering Porous Membranes to Optimize in Vitro Cellular Barrier Models." IEEE NANOMED. IEEE. Waikiki, HI. 4 Dec. 2018. Conference Presentation. *
Amlan Ganguly
Professor
Computer Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Ganguly, A., et al. "The Advances, Challenges and Future Possibilities of Millimeter-Wave Chip-to-Chip Interconnections for Multi-Chip Systems." MDPI Journal of Low Power Electronics and Applications 8. 5 (2018): 1-36. Web. ˜
Mamun, S. A., et al. "Performance Evaluation of a Power-Efficient and Robust 60GHz Wireless Server-to-Server Datacenter Network." IEEE Transactions on Green Communications and Networking 2. 4 (2018): 1174-1185. Web. ˜
Published Conference Proceedings
Relyea, R., et al. "Multimodal localization for autonomous agents." Proceedings of the Proceedings of Electronic Imaging: Image Processing Algorithi. Ed. IEEE. San Francisco, CA: n.p., 2019. Web. *
Li, M., et al. "Simulation and Analysis of a Deep Reinforcement Learning Approach for Task Selection by Autonomous Material Handling Vehicles." Proceedings of the Proceedings of the 2018 Winter Simulation Conference. Ed. IEEE. Piscataway, NJ: n.p., Web. *
Ahmed, M. M., et al. "A One-to-many Traffic Aware Wireless Network-in-Package for Multi-Chip Computing Platorms." Proceedings of the Proceedings of IEEE System-On-Chip Conference (SoCC). Ed. IEEE. Arlington, VA: n.p., 2018. Web. *
Ahmed, M. M., N. Mansoor, and A. Ganguly. "An Asymmetric, Energy Efficient One-to-Many Traffic-Aware Wireless Network-in-Package Interconnection Architecture for Multichip Systems." Proceedings of the Proceedings of International Green and Sustainable Computing Conference (IGSC). Ed. IEEE. Pittsburgh, PA: n.p., 2018. Web. *
Vashist, A., A. Ganguly, and M. Indovina. "Testing WiNoC-Enabled Multicore Chips with BIST for Wireless Interconnects." Proceedings of the 2018 Twelfth IEEE/ACM International Symposium on Networks-on-Chip (NOCS). Ed. IEEE. Turin, Italy: n.p., 2018. Web. *
Shinde, T., et al. "A 0.24pJ/bit, 16 Gbps OOK Transmitter Circuit in 45-nm CMOS for Inter and Intra-Chip Wireless Interconnects." Proceedings of the Proceedings of the 2018 on Great Lakes Symposium on VLSI (GLSVLSI '18). Ed. IEEE. New York, NY: n.p., 2018. Web. *
Narde, R. S., J. Venkataraman, and A. Ganguly. "Emhancement of Intra-chip Transmission between Wireless Interconnects using Artificial Magnetic Conductors." Proceedings of the 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. Ed. IEEE. Boston, MA: n.p., 2018. Web. *
Narde, R. S., et al. "On-Chip Antennas for Inter-Chip Wireless Interconnections: Challenges and Opportunities." Proceedings of the 12th European Conference on Antennas and Propagation (EuCAP). Ed. IEEE. London, UK: n.p., 2018. Web. *
Hany Ghoneim
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Kini, S., A. Fuentes-Aznar, and H. Ghoneim. "Composite Fabric Blankets for Plastic Gears." Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition IMECE2018. Ed. Olesay I. Zupanska. Pitsburg, PA: n.p., 2018. Print. «
Amitabha Ghosh
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Ghosh, Amitabha. "Motivation Building Strategies of Mathematics Instruction for Undergraduate Students in Mechanical Engineering." Proceedings of the 2018 ASEE Annual Conference & Exposition, June 24 - 27, 2018, Salt Lahe City, Utah. Ed. ASEE. Salt Lake City, UT: ASEE, Print. *
Surendra Gupta
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Lutondo, S., et al. "Surface Modification of Polyethersulphone (PES) with Ozone." Ozone: Science & Engineering. (2018): ISSN: 0191-9512. Web. £
Omar, O., et al. "Reaction of Ozone with Polybenzimidazole (PBI)." Ozone: Science & Engineering 40. 5 (2018): 7 pages. Web. £
Li, X., et al. "Surface Modification of Polystyrene with O Atoms Produced Downstream from an Ar/O2 Microwave Plasma." Technologies 2018 6. 21 (2018): 8 pages. Web. £
Published Conference Proceedings
Gupta, S. K., et al. "Scholarship Programs for Vertical Transfers in Engineering and Engineering Technology." Proceedings of the 2018 ASEE Annual Conference, June 24-27, 2018, Salt Lake City, UT. Ed. ASEE. Salt Lake City, UT: ASEE, Web. «
Anju Gupta
Assistant Professor
Chemical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Rishi, S, A Gupta, and A Kandlikar. "Improving Aging Performance of Electrodeposited Copper Coatings During Pool Boiling." Applied Thermal Engineering,. (2018): 406-414. Print.
Alhasani, W, M Gupta, and A Euler. "The Influence of Zn2+-doped PVDF on the Fluorescent Properties of Rhodamine 6G." Journal of Luminescence. (2018): 116 - 125. Print.
Published Conference Proceedings
Rishi, A, A Kandlikar, and S Gupta. "Improving Liquid Supply Pathways on Graphene Oxide Coated Surfaces for Enhanced Pool Boiling Heat Transfer Performance." Proceedings of the Proceedings of the ASME 2018 16th International Conference on Nanochannels, Microchannels, and Minichannels. Ed. ICNMM 2018,. Dubrovnik, Croatia: n.p., Print.
Provisional Patent
P,, Gupta, A, Valenzuela. "Novel Tri-surfactant Emulsion for oil Spill Mitigation and Drug Delivery Applications." U.S. Provisional Patent Application 62647143. 23 Mar. 2018.
External Scholarly Fellowships/National Review Committee
9/1/2019 -
8/31/2021
American Chemical Society Petroleum Research Fund New Directions Grant
Amount: 110,000
Peer Reviewed/Juried Poster Presentation or Conference Paper
A, Gupta. "Phase Inversion, Creaming Effects and Multiple Emulsion Formation with Food Grade Surfactants." Proceedings of the Colloidal, Macromolecular and Polyelectrolyte Solutions, Gordon Research Conference. Ed. NA. Ventura, California: n.p..
A, Gupta. "Improving Liquid Supply Pathways on Graphene Oxide Coated Surfaces for Enhanced Pool Boiling Heat Transfer Performance." Proceedings of the ICNMM 2018. Ed. NA. Dubrovnik, Croatia: n.p..
A, Gupta. "Improving Aging Performance of Electrodeposited Copper Coatings during Pool Boiling." Proceedings of the ICNMM 2018. Ed. NA. Dubrovnik, Croatia: n.p..
A, Kalyanram, P, Gupta,. "Phase Transitions in Cell Membrane: An Insight on Drug Interactions and Internalization." Proceedings of the NATAS 2018. Ed. NA. Philadelphia, PA: n.p..
A, Gupta. "Biophysical, Cytotoxicity and Cellular Uptake Studies Using Novel Fluorophores for Cancer Detection." Proceedings of the Drug Carriers in Medicine and Biology, Gordon Research Conference. Ed. NA. Mount Snow, Vermont: n.p..
Edward Hensel Jr.
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Eddingsaas, N.C., et al. "Qualitative Analysis of e-liquid Emissions as a Function of Flavor Additives Using Two Aerosol Capture Methods." International Journal of Environmental Research and Public Health 15. 2 (2018): 1-14. Print. *
Robinson, R. J., et al. "Effect of e-liquid Flavor on Topography and Consumption Behavior in a 2-week Natural Environment Switching Study." Public Library of Science, PLoS ONE 13. 4 (2018): 1-17. Web. *
O.Lee, Y., et al. "Latent Class Analysis of E-cigarette Use Sessions in Their Natural Environments." Nicotine & Tobacco Research. (2018): 1-8. Print. *
Hensel, E. C., S. Jayasekera, and R. J. Robinson. "Accounting for Effects of System Dynamics to Improve Accuracy of Emissions Reported in E-cig Vaping Machines." Inhalation Toxicology. (2018): 1-11. Print. *
Robinson, R. J., et al. "A Framework to Investigate the Impact of Topography and Product Characteristics on Electronic Cigarette Emissions." Public Library of Science, PLoS ONE 13. 11 (2018): 1-19. Web. *
Peer Reviewed/Juried Poster Presentation or Conference Paper
Lee, Y. O., et al. "Identifying E-cigarette Person and Session Types Using Real-World Puff Topography." Proceedings of the SRNT 2018 Annual Meeting. Ed. SRNT. Baltimore, MD: SRNT. *
Hensel, E. C., et al. "Analyzing Behavior of e-cig Users in Their Natural Environment Using Continuous Real-Time Plots of Aerosol Consumption." Proceedings of the SRNT 2018 Annual Meeting. Ed. SRNT. Baltimore, MD: SRNT. *
Robinson, R. J., et al. "Effect of e-liquid Product Characteristics on Topography Behavior of e-cig Users in a 2-week Natural Environment Switching Study." Proceedings of the SRNT 2018 Annual Meeting. Ed. SRNT. Baltimore, MD: SRNT. *
Eddingsaas, N. C., et al. "Effect of Hookah Hose Dimensions and Material on TPM, Nicotine, and Aldehydes." Proceedings of the 2018 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *
Robinson, R. J., et al. "Family of Topography Monitors for Natural Environment Observation Studies of Tobacco Product Use." Proceedings of the 2018 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *
Hensel, E. C., et al. "Hookah and Dual-Use Behavior in the Natural Environment." Proceedings of the 2018 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *
Jayasekera, S., E. C. Hensel, and R. J. Robinson. "Feasibility Assessment of Simultaneous Puff and Chest Belt Monitoring to Better Understand Tobacco Product Inhalation Patterns." Proceedings of the 2018 BMES Annual Meeting. Ed. BMES. Atlanta, GA: BMES. *
Patricia Iglesias Victoria
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Kudtarkar, K., et al. "Effects of Chemical Composition on the Electromechanical Properties of Polymer Ionic-liquid Gel Beads." J. Fluids Eng 140. 10 (2018): 101103-1-6. Web. «
Matczak, L, et al. "Effect of Cation Nature on the Lubricating and Physicochemical Properties of Three Ionic Liquids." Tribology International 124. (2018): 23-33. Web. *
Tock, A, et al. "Tribological Performance of Textured Surfaces Created by Modulation Assisted Machining." ASME Journal of Tribology 140. 6 (2018): 061704-1-8. Web. *
Metha, P., et al. "Effect of Textured Surfaces Created by Modulation Assisted Machining on the Stribeck Curve and Wear Properties of Steel–aluminum Contact." Int. J. Adv. Manufaturing Technol 99. 1-4 (2018): 399-409. Web. «
Schertzer, M. and P. Iglesias. "Meta-Analysis Comparing Wettability Parameters and the Effect of Wettability on Friction Coefficient in Lubrication." Lubricants 6. 70 (2018): N/A. Web. *
Patel, A., H. Guo, and P. Iglesias. "Study of the Lubricating Ability of Protic Ionic Liquid on an Aluminum–Steel Contact." Lubricants 6. 70 (2018): N/A. Web. *
Kudtarkar, K., et al. "Effect of Metallization on the Electromechanical Properties of Microfluidically Synthesized Hydrogel Beads." J. Fluids Eng 141. 3 (2018): 031303-1-6. Web. *
Published Conference Proceedings
Ferri, Chris, et al. "Ionic Liquids as Additves to Cutting Fluids to Reduce Machine tool Friction and Wear." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., Web. *
Guo, H., et al. "The Effects of Single-Walled Carbon Nanotubes and Ionic Liquids in reduction of Friction and Wear." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web. *
Gutierrez, M. A., et al. "Effect of Carbon Nanotube-Phosphinate Ionic Liquid Thin Boundary Layer on the Tribological Behavior of Aluminum Alloy in Steel-on-Aluminum contact." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web. *
Magar, S., H. Guo, and P. Iglesias. "Estimation of Energy Conservation in Internal Combustion Engine Vehicles using Ionic Liquids as Additive." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web. *
Mark Indovina
Senior Lecturer
Electrical and Microelectronic Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Ganguly, Amlan, et al. "The Advances, Challenges and Future Possibilities of Millimeter-Wave Chip-to-Chip Interconnections for Multi-Chip Systems." Journal of Low Power Electronics and Applications 8. 1 (2018): 1-36. Web. *
Published Conference Proceedings
Shinde, Tanmay, et al. "A 0.24pJ/Bit, 16Gbps OOK Transmitter Circuit in 45-nm CMOS for Inter and Intra-Chip Wireless Interconnects." Proceedings of the GLSVLSI '18, Chicago, IL, USA. Ed. Proceedings of the 2018 on Great Lakes Symposium on VLSI. NY, NY: ACM, 2018. Print. *
Satish Kandlikar
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Perez-Raya, I. and S.G. Kandlikar. "Discretization and Implementation of a Sharp Interface Model for Interfacial Heat and Mass Transfer During Bubble Growth." Int. J. Heat Mass Transf. 116 (2018): 30-49. Web. *
Wong, P., K.S.V. Santhanam, and S.G. Kandlikar. "Cobalt Deposition in Graphene Quantum Dot Bath: Electrochemical and Spectroscopic Features: A Prospective Sensor Material." Journal of The Electrochemical Society 165. 5 (2018): B232-B239. Print. *
Perez-Raya, I and S.G. Kandlikar. "Discretization and Implementation of a Sharp Interface Model for Interfacial Heat and Mass Transfer During Bubble Growth." International Journal of Heat and Mass Transfer. (2018): 30-49. Print. *
Recinella, A. and S.G. Kandlikar. "Enhanced Flow Boiling Using Radial Open Microchannels With Manifold and Offset Strip Fins." Journal of Heat Transfer 140. 2 (2018): 21502. Print. *
Jaikumar, A., T.S. Emery, and S.G. Kandlikar. "Interplay Between Developing Flow Length and Bubble Departure Diameter During Macroconvection Enhanced Pool Boiling." Applied Physics Letters 112. 7 (2018): 71603. Print. *
Emery, T.S., P.A. Raghupathi, and S.G. Kandlikar. "Flow Regimes and Transition Criteria during Passage of Bubbles through a Liquid-Liquid Interface." Langmuir 34. 23 (2018): 6766-6776. Web. *
Bulut, M., S.G. Kandlikar, and N. Sozbir. "A Review of Vapor Chambers." Heat Transfer Engineering. (2018): 1-23. Web. *
Rishi, A.M., A. Gupta, and S.G. Kandlikar. "Improving Aging Performance of Electrodeposited Copper Coatings During Pool Boiling." Applied Thermal Engineering. (2018): 406-414. Print. *
Emery, T.S., et al. "Dual Enhancement in HTC and CHF for External Tubular Pool Boiling–A Mechanistic Perspective and Future Directions." International Journal of Heat and Mass Transfer. (2018): 1053-1073. Print. *
Gupta, A., et al. "A Multiscale Morphological Insight into Graphene Based Coatings for Pool Boiling Applications." Heat Transfer Engineering 39. 15 (2018): 1331-1343. Print. *
Gonzalez-Hernandez, J.L., et al. "Generation and Thermal Simulation of a Digital Model of the Female Breast in Prone Position." ASME J of Medical Diagnostics 1. 4 (2018): 41006. Web. *
Emery, T.S., P.A. Raghupathi, and S.G. Kandlikar. "Bubble Growth Inside an Evaporating Liquid Droplet Introduced in an Immiscible Superheated Liquid." International Journal of Heat and Mass Transfer 127. Part C (2018): 313-321. Print. *
Hayes, A., et al. "Regulating Flow of Vapor to Enhance Pool Boiling." Applied Thermal Engineering 149. (2018): 1044-1051. Web. *
Chauhan, A. and S.G. Kandlikar. "Characterization of a Dual Taper Thermosiphon Loop for CPU Cooling in Data Centers." Appl. Therm. Eng. 146. (2018): 450-458. Print. *
Published Conference Proceedings
Perez-Raya, I. and S.G. Kandlikar. "A Volume of Fluid Based Model for the Simulation of Bubble Growth Over a Heated Surface." Proceedings of the ASME 2018 16th International Conference on Nanochannels, Microchannels, and Microchannels. Ed. -. Dubrovnik, Croatia: n.p., 2018. Web. *
Rishi, A.M., A. Gupta, and S.G. Kandlikar. "Improving Liquid Supply Pathways on Graphene Oxide Coated Surfaces for Enhanced Pool Boiling Heat Transfer Performance." Proceedings of the , ASME 2018 16th International Conference on Nanochannels, Microchannels, and Microchannels. Ed. -. Dubrovnik, Croatia: n.p., 2018. Web. *
Perez-Raya, I. and S.G. Kandlikar. "Simulation of Bubble Growth Over a Heated Surface with Interfacial Temperature Gradients and Sharp Interface." Proceedings of the ASME International Mechanical Engineering Congress & Exposition (IMECE). Ed. -. Pittsburgh, PA: n.p., 2018. Web. *
Full Patent
Kandlikar, S.G.. "Heat Transfer System and Method Incorporating Tapered Flow Field." U.S. Patent 16/018,927. 2018.
Invited Keynote/Presentation
Kandlikar, S.G. "New Understanding of the Heat Transfer Mechanisms During Pool and Flow Boiling and its Application in Boiling Enhancement – An innovation Driven Approach." Graduate Seminar. University of California, Irvine. Irvine, CA. 2 Mar. 2018. Guest Lecture.
Kandlikar, S.G. "Heat Transfer Mechanisms During Pool and Flow Boiling and its Application in Boiling Enhancement – An Innovation Driven Approach." Graduate Seminar. Darmstadt University. Darmstadt, Germany. 7 Jun. 2018. Guest Lecture.
Kandlikar, S.G. "Current Status of Flow Boiling Heat Transfer." PhD Defence. Trondheim University. Trondheim, Norway. 3 Sep. 2018. Guest Lecture.
Parsian Katal Mohseni
Associate Professor
Microsystems Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Kim, Jeong Dong, et al. "Self-Anchored Catalyst Interface Enables Ordered Via Array Formation from Submicrometer to Millimeter Scale for Polycrystalline and Single-Crystalline Silicon." ACS Applied Materials & Interfaces 10. 10 (2018): 9116-9122. Print. *
Wilhelm, Thomas S., et al. "Ordered Al(x)Ga(1–x)As Nanopillar Arrays via Inverse Metal-Assisted Chemical Etching." ACS Applied Materials & Interfaces 10. (2018): 27488-27497. Print. *
Published Conference Proceedings
Baboli, Mohadeseh A., et al. "Self-Assembled InAsP and lnAlAs Nanowires on Graphene Via Pseudo-Van Der Waals Epitaxy." Proceedings of the 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO). Ed. N/A. Cork, Ireland: IEEE, 2018. Web. £
Michael Kuhl
Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Moskal, Stephen, Shanchieh Jay Yang, and Michael E Kuhl. "Cyber Threat Assessments via Attack Scenario Simulation over Integrated Adversary and Network Models." Journal of Defense Modeling and Simulation 15. 1 (2018): 13-29. Print. *
Published Conference Proceedings
Gupta, Surendra ”Vinnie” K., et al. "Scholarship Programs for Vertical Transfers in Engineering and Engineering Technology." Proceedings of the 2018 ASEE Annual Conference and Exposition. Ed. Unknown. Salt Lake City, UT: American Society of Engineering Education, 2018. Web. «
Li, Maojia Patrick, et al. "Simulation Analysis of a Deep Reinforcement Learning Approach for Task Selection by Autonomous Material Handling Vehicles." Proceedings of the 2018 Winter Simulation Conference. Ed. M. Rabe et al. Piscataway, NJ: IEEE, 2018. Web. *
Ceresoli, Jason D. and Michael E. Kuhl. "A Simulation Framework for the Design and Analysis of Healthcare Clinics." Proceedings of the 2018 Winter Simulation Conference. Ed. M. Rabe et al. Piscataway, NJ: IEEE, 2018. Web. *
Pai, Pradeep G. and Michael E. Kuhl. "An Adaptive Approach for Efficient Hospital Supply Chain System Management." Proceedings of the 2018 Institute of Industrial and Systems Engineers Annual Conference. Ed. K. Barker, D. Berry, and C. Rainwater. Norcross, GA: Institute of Industrial and Systems Engineers, 2018. Web. *
Stolze, David, et al. "Feature Engineering of Time-Series Data to Extract Discriminative Features." Proceedings of the 2018 Institute of Industrial and Systems Engineers Annual Conference. Ed. K. Barker, D. Berry, and C. Rainwater. Norcross, GA: Institute of Industrial and Systems Engineers, 2018. Web. *
Moskal, Stephen, Shanchieh Jay Yang, and Michael E. Kuhl. "Extracting and Evaluating Similar and Unique Cyber Attack Strategies from Intrusion Alerts." Proceedings of the 2018 IEEE International Conference on Intelligence and Security Informatics (ISI). Ed. Unknown. Piscataway, NJ: IEEE, 2018. Web. *
Santosh Kurinec
Professor
Electrical and Microelectronic Engineering
Kate Gleason College of Engineering
2018 Submissions
Full Length Book
Kurinec, Santosh K. Emerging Photovoltaic Materials:Silicon & Beyond. Hoboken, NJ: Scrivener Publishing WILEY, 2018. Print.
Kathleen Lamkin-Kennard
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Jung, John, et al. "Isolating the Influences of Fluid Dynamics on Selectin-Mediated Particle Rolling at Venular Junctional regions." Microvascular Research 118. (2018): 144-154. Print. «
Corbaci, Mert, Wayne Walter, and Kathleen A. Lamkin-Kennard. "Implementation of Soft-Lithography Techniques for Fabrication of Bio-Inspired Multi-Layer Dielectric Elastomer Actuators with Interdigitated Mechanically Compliant Electrodes." Actuators 7. 4 (2018): 73. Web. *
Brian Landi
Professor
Chemical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Bucossi, Andrew R., et al. "Effects of Solution Properties on Iodine Monobromide Doping for Enhanced Carbon Nanotube Electrical Conductivity." ACS Applied Nano Materials 1. 5 (2018): 2088-2094. Print. *
Crompton, Kyle R., et al. "Lithium-ion Cycling Performance of Multi-Walled Carbon Nanotube Electrodes and Current Collectors Coated with Nanometer Scale Al2O3 by Atomic Layer Deposition." Electrochimica Acta 292. (2018): 628-638. Print. *
Leggiero, Anthony P., et al. "High Conductivity Copper–Carbon Nanotube Hybrids via Site-Specific Chemical Vapor Deposition." ACS Applied Nano Materials 2. 1 (2018): 118–126. Print. *
Amori, A., et al. "Defects Enable Dark Exciton Photoluminescence in Single-Walled Carbon Nanotubes." J. Phys. Chem. C 122. (2018): 3599-3607. Print. *
Blanca Lapizco-Encinas
Professor
Biomedical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
H., Mukaibo,, et al. "Ultrathin nanoporous membranes for insulator-based dielectrophoresis (iDEP)." Nanotechnology 29. 23 (2018): 235704. Print. *
V., Perez-Gonzalez,, et al. "A simple approach to reducing particle trapping voltage in insulator-based dielectrophoretic systems." Analytical Chemistry 90. 7 (2018): 4310-4315. Print. *
D., Polniak, et al. "Separating large microscale particles by exploiting charge differences with dielectrophoresis." Journal of Chromatography A 1545. (2018): 84-92. Print. *
Journal Editor
CHIEF), Blanca H. Lapizco-Encinas (EDITOR IN, ed. ELECTROPHORESIS. GERMANY: WILEY, 2018. Web.
National/International Competition Award Winner
Hill, Nicole and Blanca H. Lapizco-Encinas. AES. TravelGrant to attend the 2018 AES Annual Meeting at Scix. Atlanta, GA, 2018. ≠
Peña, Adriana Coll de and Blanca H. Lapizco-Encinas. AES. Travel Grant to attend the 2018 AES Annual Meeting at Scix. Atlanta, GA, 2018. ≠
Invited Keynote/Presentation
B.H., Lapizco-Encinas,. "Keynote address at the Graduate Lunch: Rapid microparticle assessments with insulator based dielectrophoresis." Society of Hispanic Professional Engineers (SHPE) 2018 Convention. Society of Hispanic Professional Engineers. Cleveland, OH. 8 Nov. 2018. Keynote Speech. ≠
B.H., Lapizco-Encinas,. "Fine-tuning dielectrophoretic particle assessments." TP 2018 - 25th International Symposium on Electro- and Liquid Phase-Separation Techniques. University of Kyoto. Kyoto, Japan. 20 Aug. 2018. Keynote Speech. ≠
B.H., Lapizco-Encinas,. "Microparticle analysis with insulator based dielectrophoresis." Conference Dielectrophoresis 2018. University of Surrey. Surrey, England. 24 Jul. 2018. Keynote Speech. ≠
V.H., Perez-Gonzalez,, et al. "Lowering the required trapping voltage in insulator-based dielectrophoretic systems by post-array optimization." International Conference on Nanotechnology Tec.Nano 2018. Tec de Monterrey, Mexico. Monterrey, Mexico. 15 Nov. 2018. Conference Presentation. ≠
R.C., Gallo-Villanueva,, et al. "Computational and experimental analysis of the influence of channel design over joule heating effects in insulator-based dielectrophoretic devices." International Conference on Nanotechnology Tec.Nano 2018. Tec de Monterrey, Mexico. Monterrey, Mexico. 15 Nov. 2018. Conference Presentation. ≠
B.H., Lapizco-Encinas,. "Strategies for particle dielectrophoresis." Annual AES Meeting @ Scix. AES & Scix. Atlanta, GA. 23 Oct. 2018. Conference Presentation. ≠
A., Coll De Peña,, et al. "Insulator-based dielectrophoresis to purify and enrich bacteriophages." Annual AES Meeting @ Scix. AES & Scix. Atlanta, GA. 22 Oct. 2018. Conference Presentation. £
A., Coll De Peña,, et al. "Insulator-based dielectrophoresis to characterize the electrokinetic behavior of bacterial cells and create a library." Annual AES Meeting @ Scix. AES & Scix. Atlanta, GA. 22 Oct. 2018. Conference Presentation. ≠
N., Hill,, Polniak, D., and Lapizco-Encinas, B.H. "Particle separation using dielectrophoresis chromatography." Annual AES Meeting @ Scix. AES & Scix. Atlanta, GA. 22 Oct. 2018. Conference Presentation. ≠
N., Hill, and Lapizco-Encinas, B.H. "Assessment of correction factors employed in insulator based dielectrophoresis." Annual AES Meeting @ Scix. AES & Scix. Atlanta, GA. 22 Oct. 2018. Conference Presentation. ≠
A., Coll De Peña,, et al. "Electrokinetic Characterization of Bacteriophages using Insulator-based Dielectrophoresis." 2018 RIT Undergraduate Research Symposium. RIT. Rochester, NY. 2 Aug. 2018. Conference Presentation. ≠
C., Lentz,, Hidalgo-Caballero, S., and Lapizco-Encinas, B.H. "Low frequency AC potentials for insulator based dielectrophoresis." 2018 RIT Undergraduate Research Symposium. RIT. Rochester, NY. 2 Aug. 2018. Conference Presentation. ≠
Kate Leipold
Principal Lecturer
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Leipold, Kate and Sarilyn Ivancic. "Efforts to Improve Free Body Diagrams." Proceedings of the 2018 ASEE Annual Conference & Exposition. Ed. ASEE. Salt Lake City, Ut: ASEE, 2018. Web. *
Cristian Linte
Associate Professor
Biomedical Engineering
Kate Gleason College of Engineering
2018 Submissions
Full Length Book
Linte, C.A. and Peters, T.M., Yaniv, Z., Williams, J. Mixed and Augmented Reality in Medicine. 1st Edition ed. London, UK: Taylor & Francis, 2018. Print. * ≠
Journal Paper
C.A., Linte, and Camp, J.J., Rettmann, M.E., Haemmerich, D., Aktas, M.K., Huang, D.T., Packer, D.L., Holmes, III D.R. "Lesion Modeling, Characterization, and Visualization for Image-guided Cardiac Ablation Therapy Monitoring." SPIE Journal Medical Imaging. J Med Imag 5. 2 (2018): 021218-1-15. Print.
Linte, C.A. and Hasan, S.M.K. "A Modified U-Net Convolutional Network Featuring a Nearest-neighbor Re-sampling-based Elastic-Transformation for Brain Tissue Characterization and Segmentation." Proc IEEE Western NY Image & Signal Proc Workshop. (2018): DOI: 10.1109/WNYIPW.2018.8576421. Web. * ≠
Linte, C.A. and Jalalahmadi, G., Helguera, A., Mix, D. "Modeling the effects of regional material properties on the wall stress distribution of abdominal aortic aneurysms." Proc SPIE Medical Imaging: Biomedical Applications in Molecular, Structural, and Functional Imaging 10578. (2018): 105780I-1—14. Print. * ≠
Linte, C.A. and Dangi, S., Yaniv, Z.R. "Cine cardiac MRI slice misalignment correction towards full 3D left ventricle segmentation." Proc. SPIE Medical Imaging: Image-guided Procedures, Robotic Interventions and Modeling 10576. (2018): 1057607-1—13. Print. * ≠
Linte, C.A. and Jalalahmadi, G., Helguera, M., Hodis, S., Mix, D. "(Peak) Wall Stress as an Indicator of Abdominal Aortic Aneurysm Severity." Proc IEEE Western NY Image & Signal Proc Workshop. (2018): 1-5. Print. * ≠
Linte, C.A. and Liu, D., Peck, I., Schwarz, K.Q. "Left Ventricular Ejection Fraction: Comparison between True Volume-based Measurements and Area-based Estimates." Proc IEEE Western NY Image & Signal Proc Workshop. (2018): 1-5. Print. * ≠
Book Chapter
Linte, C.A. and Peters, T.M., Sacks, M.S. "Augmented and Virtual Visualization for Image-Guided Cardiac Therapeutics." Mixed and Augmented Reality in Medicine. London, United Kingdom: Taylor & Francis, 2018. 231-249. Print. * ≠
National/International Competition Award Winner
Linte, C.A. IEEE Region 1 Award. Outstanding Teacher / Scientist in an IEEE Area of Interest Award in Biomedical Engineering, Medical Image Computing and Computer-assisted Therapy. Albany, NY, 2018. ≠
Peer Reviewed/Juried Poster Presentation or Conference Paper
Upendra, R.R. "Pre-trained Deep Learning Algorithms for Detection and Classification of Diabetic Retinopathy: Review and Side-by-Side Comparison." Proceedings of the IEEE Western NY Image & Signal Proc Workshop. Ed. Ptucha, R. Rochester, NY: n.p.. ≠
Invited Keynote/Presentation
C.A., Linte,. "Medical Imaging and Visualization: Enabling Computer-assisted Diagnosis and Therapy." Minisymposium on Imaging, Modeling, Visualization and Biomedical Computing. Society of Industrial and Applied Mathematics (SIAM) – Imaging Science Symposium. Bologna, Italy. 6 Jun. 2018. Keynote Speech. ≠
Linte, C.A. "Medical Imaging and Visualization: Enabling Computer-assisted Diagnosis and Therapy." Minisymposium on Imaging, Modeling, Visualization and Biomedical Computing. Society of Industrial and Applied Mathematics (SIAM) – Imaging Science Symposium. Bologna, Italy. 6 Jun. 2018. Keynote Speech. ≠
Linte, C.A. "Biomechanical reconstruction and visualization of myocardial active stresses for cardiac viability assessment." Biomechanics Days. Bulgarian Academy of Sciences. Sofia, Bulgaria. 31-1 Oct. 2018. Keynote Speech. ≠
Linte, C.A. "Automatic reconstruction of long-limb standing panoramas from multiple X-ray image sectors." Biomechanics Days. Bulgarian Academy of Sciences. Sofia, Bulgaria. 31-1 Oct. 2018. Keynote Speech. ≠
Linte, C.A. "Wall stress as a biomarker for abdominal aortic aneurysm severity and rupture." Biomechanics Days. Bulgarian Academy of Sciences. Sofia, Bulgaria. 31-1 Oct. 2018. Keynote Speech. ≠
Hasan, S.M.K. "Modified U-Net Convolutional Network Featuring a Nearest-neighbor Re-sampling-based Elastic-Transformation for Brain Tissue Characterization and Segmentation." IEEE Western NY Image & Signal Proc Workshop. IEEE Rochester NY Section. Rochester, NY. 5 Oct. 2018. Keynote Speech. ≠
Jalalahmadi, G. "(Peak) Wall Stress as an Indicator of Abdominal Aortic Aneurysm." IEEE Western NY Image & Signal Proc Workshop. IEEE Rochester NY Section. Rochester, NY. 5 Oct. 2018. Keynote Speech. ≠
Liu, D. "Left Ventricular Ejection Fraction: Comparison between True Volume-based Measurements and Area-based Estimates." IEEE Western NY Image & Signal Proc Workshop. IEEE Rochester NY Section. Rochester, NY. 5 Oct. 2018. Keynote Speech. ≠
Linte, C.A. "Background Lung Tissue Deformation Correction and Ground Glass Nodule Tracking using A Feature-based Affine Registration." Computer Assisted Radiology and Surgery. International Foundation of Computer-assisted radiology and Surgery (IFCARS). Berlin, Germany. 19-23 Jun. 2018. Keynote Speech. ≠
Jalalahmadi, G. "Toward modeling the effects of regional material properties on the wall stress distribution of abdominal aortic aneurysms." SPIE Medical Imaging: Biomedical Applications in Molecular, Structural, and Functional Imaging. SPIE. Houston, TX. 10-15 Feb. 2018. Keynote Speech. ≠
Dangi, S. "Cine cardiac MRI slice misalignment correction towards full 3D left ventricle segmentation." SPIE Medical Imaging: Image-guided Procedures, Robotic Interventions and Modeling. SPIE. Houston, TX. 10-15 Feb. 2018. Keynote Speech. ≠
Linte, C.A. "Assessment of visualization and interaction paradigms for medical imaging visualization, simulation and training." SPIE Medical Imaging: Imaging Informatics for Healthcare, Research, and Applications. SPIE. Houston, TX. 10-15 Feb. 2018. Keynote Speech. ≠
Linte, C.A. "From medical image computing to computer-aided diagnosis tools: Successes, Challenges, Guidelines and Lessons Learned." Computer methods in Biomechanics and Biomedical Engineering (CMBBE). CMBBE: Imaging & Visualization. Libson, Portugal. 26 Mar. 2018. Keynote Speech. ≠
E Lyshevski
Professor
Electrical and Microelectronic Engineering
Kate Gleason College of Engineering
2018 Submissions
Full Length Book
Editor-in-chief, S. E. Lyshevski,. Encyclopedia of Nanoscience and Nanotechnology. 3rd on-line ed. Boca Raton, FL: CRC, 2018. Web. *
Published Conference Proceedings
Lyshevski, J. A. Allison, R. Ptucha and S. E. "Resilient Communication, Object Classification and Data Fusion in Unmanned Aerial Systems." Proceedings of the IEEE Conf. Unmanned Aerial Systems. Ed. IEEE. IEEE, NJ: IEEE, 2018. Print.
Lyshevski, S. E. "Multi-agent Coordination and Control for Aerial Systems." Proceedings of the IEEE Proc. Conf. Unmanned Aerial Systems. Ed. IEEE. NJ, NJ: IEEE, 2018. Print. *
Lyshevski, I. Puchades, P. P. Markopoulos, B. J. Landi and S. E. "Planar Carbon Nanotube Antennas and Data-centric Secure Communication." Proceedings of the Proc. IEEE Conf. Electronics and Nanotechnology. Ed. IEEE. NJ, NJ: IEEE, 2018. Print. *
Lyshevski, S. E. "Distributed Processing and Data Fusion in Dynamic Systems with Microsystem Sensor Networks." Proceedings of the Proc. IEEE Conf. Electronics and Nanotechnology. Ed. IEEE. NJ, NJ: IEEE, 2018. Print. *
Lyshevski, M. Hobosyan, K. S. Martirosyan and S. E. "Design and Evaluation of 3D-printed Microthrusters with Nanothermite Propellants." Proceedings of the Proc. IEEE Conf. Electronics and Nanotechnology. Ed. IEEE. NJ, NJ: IEEE, 2018. Print. *
Lyshevski, J. A. Allison and S. E. "Aerial Systems with Micro Sensors: Data Acquisition and Descriptive Reality in Physical and Virtual Environments." Proceedings of the Proc. IEEE Conf. Electronics and Nanotechnology. Ed. IEEE. NJ, NJ: IEEE, 2018. Print. *
Lyshevski, L. Herlihy and S. E. "Real-time Dynamic Data Processing and Fusion: Multi-degree-of-freedom MEMS Inertial Sensors." Proceedings of the Proc. IEEE Conf. Electronics and Nanotechnology. Ed. IEEE. NJ, NJ: IEEE, 2018. Print. *
Panos Markopoulos
Assistant Professor
Electrical and Microelectronic Engineering
Kate Gleason College of Engineering
2018 Submissions
Book Chapter
Markopoulos, Panos, et al. "Outlier-resistant data processing with L1-norm principal component analysis." Advances in Principal Component Analysis: Research and Development. Ed. Ganesh R. Naik. -, -: Springer Singapore, 2018. -. Print. ˆ
Katie McConky
Associate Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Okutan, Ahmet, et al. "Forecasting Cyberattacks with Incomplete, Imbalanced, and Insignificant Data." Cybersecurity 1. 15 (2018): 1-16. Web. *
Published Conference Proceedings
Werner, Gordon, Shanchieh Jay Yang, and Katie McConky. "Leveraging Intra-Day Variations to Predict Daily Cyberattack Activity." Proceedings of the 2018 IEEE International Conference on Intelligence and Security Informatics (ISI). Ed. Nitesh Saxena and Ponnurangam Kumaraguru. Miami, Florida: IEEE, 2018. Web. *
Werner, Gordon, et al. "Forecasting Cyberattacks as Time Series with Different Aggregation Granulatiry." Proceedings of the 2018 IEEE International Symposium on Technologies for Homeland Security (HST). Ed. Unknown. Woburn, Massachusetts: IEEE, 2018. Web. *
Stolze, David, Katie McConky, and Shanchieh Jay Yang. "Automated Feature Engineering of Time-Series Data to Improve Classifier Performance." Proceedings of the 2018 Industrial and Systems Engineering Conference. Ed. K Barker, D Berry, and Chase Rainwater. Orlando, Florida: IISE, 2018. Web. «
Invited Keynote/Presentation
Chen, Roger, et al. "A Queuing Analysis of Operational Inefficiency in Public PEV Charing Stations." Transportation Research Board 97th Annual Meeting. Transportation Research Board. Washington DC, DC. 7 Jan. 2018. Conference Presentation. «
Bliss, Erika, Katie McConky, and Jay Yang. "Analyzing Temporal Patterns in Topics for Phishing Emails." IISE Annual Conference. IISE. Orlando, FL. 15 May 2018. Conference Presentation. «
Poornima Padmanabhan
Assistant Professor
Chemical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Padmanabhan, Poornima and Roseanna Zia. "Gravitational Collapse of Colloidal gels: Non-equilibrium Phase Separation Driven by Osmotic Pressure." Soft Matter 14. (2018): 3265-3287. Web. *
Dorin Patru
Associate Professor
Electrical and Microelectronic Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Nguyen, Chi H. and et al. "Integration and instrument characterization of the cosmic infrared background experiment 2 (CIBER-2)"." Proceedings of the Proc. SPIE 10698, Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave, 106984J (6 July 2018). Ed. SPIE. USA, USA: n.p., 2018. Web. *
Park, Won-Kee and et al. "Development of data storage system and GSE for cosmic infrared background experiment 2 (CIBER-2)"." Proceedings of the Proc. SPIE 10698, Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave, 1069849 (6 July 2018). Ed. SPIE. USA, USA: SPIE, 2018. Web. *
Ruben Proano
Associate Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Batista-Abikarram, Jose, Katie McConky, and Ruben A. Proano. "Energy cost minimization for unrelated parallel machine scheduling under real time and demand charge pricing." Journal of Cleaner Production 208. (2018): 232-242. Web. «
Raymond Ptucha
Associate Professor
Computer Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Ptucha, Ray, et al. "Intelligent Character Recognition using Fully Convolutional Neural Networks." Pattern Recognition PR6747. (2018): 24. Print. «
Sah, Shagan, Thang Nguyen, and Ray Ptucha. "Understanding Temporal Structure for Video Captioning." Journal of Pattern Analysis and Applications PAAA-D-17-00571. (2018): 14. Print. «
Published Conference Proceedings
Blakeslesse, Bryan, Andreas Savakis, and Ray Ptucha. "Faster Art-CNN: An Extremely Fast Style Transfer Network." Proceedings of the Western NY Image & Signal Processing Workshop. Ed. IEEE. New York, NY: n.p., Web. «
Such, Felipe Petroski, et al. "Fully Convolutional Networks for Handwriting Recognition." Proceedings of the International Conference on Frontiers of Handwriting Recognition. Ed. IEEE. New York, NY: n.p., Web. «
Jimerson, Robbie, et al. "Improving ASR Output for Endangered Language Documentation." Proceedings of the International Workshop on Spoken Languages for Under-resources Languages. Ed. IEEE. New York, NY: n.p., Web. «
Sankaran, Prashant, et al. "Simulation Analysis of Deep-Learning Approaches to Task Selection by Autonomous Vehicles for Material Handling." Proceedings of the Winter Simulation Conference. Ed. IEEE. New York, NY: n.p., Web. «
Sah, Shagan, et al. "Semantically Invariant Text-to-Image Generation." Proceedings of the International Conference on Image Processing. Ed. IEEE. New York, NY: n.p., Web. «
Sah, Shagan, et al. "Multimodal Reconstruction Using Vector Representation." Proceedings of the International Conference on Image Processing. Ed. IEEE. New York, NY: n.p., Web. «
Sah, Shagan, Sabarish Gopalakrishnan, and Ray Ptucha. "Cross Modal Retrieval using Common Vector Space." Proceedings of the Image and Vision Workshop at IEEE Computer Vision and Pattern Recognition. Ed. IEEE. New York, NY: n.p., Web. «
Allison, Jacob, Ray Ptucha, and Sergey Lyshevshki. "Resilient Communication, Object Classification and Data Fusion in Unmanned Aerial Systems." Proceedings of the International Conference on Unmanned /aircraft Systems (ICUAS). Ed. IEEE. New York, NY: n.p., Web. «
Tornblad, McKenna, et al. "Sensing and Learning Human Annotators Engaged in Narrative Sensemaking." Proceedings of the Student Research Workshop at NAACL. Ed. IEEE. New York, NY: n.p., Web. «
Dominguez, Miguel, et al. "General-Purpose Deep Point Cloud Feature Extractor." Proceedings of the Winter Conference on Applications of Computer Vision. Ed. IEEE. New York, NY: n.p., Web. «
Invited Keynote/Presentation
Ptucha, Ray. "Deep Learning Fundamentals." Tutorial at International Conference on Frontiers of Handwriting Recognition. IEEE. Niagara Falls, NY. 1 Aug. 2018. Keynote Speech. ∆
Ptucha, Ray. "Introduction to Deep Learning for Facial Analysis." Tutorial at Automatic Face and Gesture Recognition Conference. IEEE. Xi'an, China. 21 May 2018. Keynote Speech. ∆
Ptucha, Ray. "Fundamentals of Deep Learning." Tutorial at Electronic Imaging. SPIE. San Francisco, CA. 21 Jan. 2018. Guest Lecture. ∆
Ptucha, Ray. "Graph Convolutional Neural Networks." NASA Goddard Workshop on Artificial Intelligence. NASA. Baltimore, MD. 28 Nov. 2018. Guest Lecture. ∆
Ehsan Rashedi
Assistant Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Esfahani, Mohammad Iman Mokhlespour, et al. "Sharif-Human movement instrumentation system (SHARIF-HMIS): Development and validation." Medical Engineering & Physics 61. (2018): 87-94. Print. «
Kim, Sunwook, et al. "Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part I – “Expected” effects on discomfort, shoulder muscle activity, and work task performance." Applied Ergonomics 70. (2018): 315-322. Print. «
Kim, Sunwook, et al. "Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part II – “Unexpected” effects on shoulder motion, balance, and spine loading." Applied Ergonomics 70. (2018): 323-330. Print. «
Soangra, Rahul, Hema Bhatt, and Ehsan Rashedi. "Effects of load carriage and surface inclination on linear and non-linear postural variability." Safety Science 110. (2018): 427-437. Print. «
Ehsani, Hossein, et al. "The influence of mechanical vibration on local and central balance control." Journal of Biomechanics 71. (2018): 59-66. Print. «
Published Conference Proceedings
Katawala, Kavish, et al. "Effects of Slip and Trip on Low Back and the Resulting Lumbar Muscle Activity, Low Back Loads." Proceedings of the Institute of Industrial Engineering Annual Conference and Expo. Ed. IISE. Orlando, FL: n.p., Web. *
Luster, Maya, Rahul Soangra, and Ehsan Rashedi. "Effect of Back Fatigue on Gait and Propensity of Slip." Proceedings of the Institute of Industrial Engineering Annual Conference and Expo. Ed. IISE. Orlando, FL: n.p., Web. *
Shaik, Abdul and Ehsan Rashedi. "Effects of Exertion Variability on the FDI Muscle Fatigue during Intermittent Contractions." Proceedings of the Institute of Industrial Engineering Annual Conference and Expo. Ed. IISE. Orlando, FL: n.p., Web. *
Jadeja, Sid and Ehsan Rashedi. "Influence of Cognitive Loads on Fatigue Development and Recovery." Proceedings of the Institute of Industrial Engineering Annual Conference and Expo. Ed. IISE. Orlando, FL: n.p., Web. *
Michael Richards
Assistant Professor
Biomedical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Mix, Doran, et al. "Manufacturing Abdominal Aorta Hydrogel Tissue-Mimicking Phantoms for Ultrasound Elastography Validation." Journal of Visualized Experiements. 139 (2018): NA. Web. *
Published Conference Proceedings
Jalalahmadi, Golnaz, et al. "(Peak) Wall Stress As An Indicator Of Abdominal Aortic Aneurysm Severity." Proceedings of the IEEE Western New York Image and Signal Processing Workshop. Ed. . Rochester, New York: n.p., 2018. Print.
Kelly, Meghan, et al. "Novel Physical Therapy Protocol Targeting Insertional Achilles Tendinopathy Improves Patient Reported Outcomes that Persist For 1 Year." Proceedings of the American Orthopaedic Foot & Ankle Society Annual Meeting. Ed. . Rosemont, IL: n.p., 2018. Print.
Iris Rivero
Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Ramesh, Srikanthan, et al. "Fabrication and Evaluation of Poly(lactic acid), Chitosan, and Tricalcium Phosphate Biocomposites for Guided Bone Regeneration." Journal of Applied Polymer Science 135. 39 (2018): 46692. Print. £
Tran, P.L., et al. "Cryomilled Zinc Sulfide is an Effective Antibacterial Agent for Burn Wound Healing." Journal of Biomaterials Applications 33. 1 (2018): 82-93. Print. £
Risa Robinson
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Robinson, R. J., et al. "A Theoretical Framework to Investigate the Impact of Topography and Product Characteristics on Electronic Cigarette Emissions." PLoS ONE 13. 11 (2018): 206341. Web. *
Hensel, E.C., S. Jayasekera, and R. J. Robinson. "Accounting for Effects of System Dynamics to Improve Accuracy of Emissions Reported in E-cig Vaping Machines." Inhalation Toxicology. (2018): 1-11. Web. *
Lee, Youn Ok, et al. "Latent Class Analysis of E-cigarette Use Sessions in Their Natural Environments." Nicotine & Tobacco Research. (2018): -. Web. *
Robinson, R.J., et al. "Effect of e-liquid Flavor on Electronic Cigarette Topography and Consumption Behavior in a 2-week Natural Environment Switching Study." PLOS. (2018): -. Web. *
Eddingsaas, N. C., et al. "Qualitative Analysis of e-liquid Emissions as a Function of Flavor Additives Using Two Aerosol Capture Methods." Int J Environ Res Public Health 15. 2 (2018): 323. Web. *
Sul, B., et al. "Assessing Airflow Sensitivity to Healthy and Diseased Lung Conditions in a Computational Fluid Dynamics Model Validated In Vitro." Journal of Biomechanical Engineering 140. 5 (2018): 051009-051009-14. Web. *
Invited Keynote/Presentation
Robinson, R. J. "Understanding the Quantitative Relationship Between E-cigarette Use Behavior and Exposure." “Updates and Controversies Related to Inhaled Aerosols". International Society for Aerosols in Medicine, 2018 Symposium. San Diego, CA. 18 May 2018. Guest Lecture.
Peer Reviewed/Juried Poster Presentation or Conference Paper
Jayasekera, Shehan, Edward Hensel, Jr., and Risa J Robinson. "Feasibility Assessment of Simultaneous Puff and Chest Belt Monitoring to Better Understand Tobacco Product Inhalation Patterns." Proceedings of the 2018 BMES Annual Meeting, October 17-20, 2018, Atlanta, Georgia. Ed. -. Atlanta, GA: n.p.. ˜
Hensel, E.C., et al. "Hookah and Dual-Use Behavior in the Natural Environment." Proceedings of the 2018 Tobacco Regulatory Science Meeting, Baltimore, MD, June, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Robinson, R.J., et al. "Design of the wPUM™ Family of Topography Monitors for Natural Environment Observation Studies of Tobacco Product Use." Proceedings of the 2018 Tobacco Regulatory Science Meeting, Baltimore, MD, June, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Eddingsaas, N.C., et al. "Effect of Hookah Hose Dimensions and Material on TPM, Nicotine, and Aldehydes." Proceedings of the 2018 Tobacco Regulatory Science Meeting, Baltimore, MD, June, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Robinson, R. J., et al. "Effect of e-liquid Product Characteristics on Topography Behavior of e-cig Users in a 2-week Natural Environment Switching Study." Proceedings of the SRNT 2018 Annual Meeting, Baltimore, MD, Feb 21-24, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Lee, Y.O., et al. "Identifying E-cigarette Person and Session Types Using Real-World Puff Topography." Proceedings of the SRNT 2018 Annual Meeting, Baltimore, MD, Feb 21-24, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Hensel, E.C., et al. "Analyzing Behavior of e-cig Users in Their Natural Environment Using Continuous Real-Time Plots of Aerosol Consumption." Proceedings of the 2018 SRNT Annual Meeting, Baltimore, MD, Feb 21-24, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Reginald Rogers
Associate Professor
Chemical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Litts, Benjamin S., et al. "Construction of a Carbon-Nanomaterial Based Nanocomposite Aerogel for the Removal of Organic Compounds from Water." ACS Applied Nano Materials 1. 8 (2018): 4127-4134. Print. *
Rogers, Reginald E. and Todd E. Pagano. "Undergraduate Research at Rochester Institute of Technology: Intentional Efforts Towards an Inclusive Undergraduate Research Environment for Underrepresented Students." Summer 2018 Scholarship and Practice of Undergraduate Research. (2018): DOI: 10.18833/spur/1/4/2. Print. *
Published Conference Proceedings
Harel, Dan, et al. "The Language of Capstone: A Translator." Proceedings of the Capstone Design Conference. Ed. Capstone Conference. Rochester, NY: n.p., 2018. Web. *
Rogers, Reginald E. and Todd E. Pagano. "Mending the Gap: An Intentional Focus on Integrating Underrepresented Minority and Deaf/Hard-of-Hearing Students into the Research Culture." Proceedings of the 2018 ASEE Annual Meeting & Exposition. Ed. American Society for Engineering Education. Salt Lake City, UT: n.p., Web. «
Rogers, Reginald E. "Integrating Process Safety and Ethics in Classroom Discussion through Surveys." Proceedings of the 2018 ASEE Annual Meeting & Exposition. Ed. American Society for Engineering Education. Salt Lake City, UT: n.p., Web. «
Invited Keynote/Presentation
Rogers, Reginald E. "Clean or Dirty Water? Utilizing Carbon Nanomaterials Towards Achieving a Global Grand Challenge." University of Missouri Chemical Engineering Seminar Series. University of Missouri. Columbia, MO. 27 Feb. 2018. Lecture.
Rogers, Reginald E. "Got Clean Water? How Carbon Nanomaterials Play a Role in Achieving this Grand Challenge." Clemson University Graduate Seminar Series. Clemson University. Clemon, SC. 15 Mar. 2018. Lecture.
Rogers, Reginald E. "Using Carbon Nanomaterials to Address the Grand Challenge of Clean Water for all People." 256th ACS National Meeting. American Chemical Society. Boston, MA. 20 Aug. 2018. Conference Presentation.
Rogers, Reginald E. "Sustaining the Pipeline of Underrepresented Groups in STEM via the Classroom and Research Lab." ACS Chicago Local Section Meeting. American Chemical Society Chicago Section. Chicago, IL. 21 Sep. 2018. Keynote Speech.
Andreas Savakis
Professor
Computer Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Markopoulos, P., M. Dhanaraj, and A. Savakis. "Adaptive L1-norm Principal-Component Analysis with Online Outlier Rejection." IEEE Journal of Selected Topics on Signal Processing 12. 6 (2018): 1131-1143. Web. *
Book Chapter
Bacharidis, K., et al. "Methods for estimating the optical flow on fluids and deformable river streams: Α critical survey." Water Smart Grids: A Cyber-Physical Approach. Boca Raton, FL: CRC Press, 2018. 255-290. Print. *
Published Conference Proceedings
Huang, K. and A. Savakis. "Semantic Pose Machines." Proceedings of the Electronic Imaging. Ed. IS&T. San Francisco, CA: IS&T, 2018. Web. *
Savakis, A. and A. Shringarpure. "Semantic Background Estimation in Video Sequences." Proceedings of the International Conf. on Signal Processing and Integrated Networks (SPIN). Ed. IEEE. Noida, India: IEEE, 2018. Web. *
Minnehan, B., et al. "Benchmarking deep learning trackers on aerial videos." Proceedings of the Defense and Security Symposium Pattern Recognition and Tracking. Ed. SPIE. Orlando, FL: SPIE, 2018. Web. *
Minnehan, B. and A. Savakis. "Learning Robust Feature Representations in Deep Networks for Image Classification." Proceedings of the IEEE 25th International Conference on Mixed Design of Integrated Circuits and Systems (MIXDES). Ed. IEEE. Gdynia, Poland: IEEE, 2018. Web. *
Shagan, S., et al. "Multimodal Reconstruction Using Vector Representation." Proceedings of the International Conf. on Image Processing (ICIP). Ed. IEEE. Athens, Greece: IEEE, 2018. Web. *
Shagan, S., et al. "Semantically Invariant Text-to-Image Generation." Proceedings of the International Conf. on Image Processing (ICIP). Ed. IEEE. Athens, Greece: IEEE, 2018. Web. *
Vasu, B., F. Rahman, and A. Savakis. "Aerial-CAM: Salient Structures and Textures in Network Class Activation Maps of Aerial Imagery." Proceedings of the 13th Image, Video, and Multidimensional Signal Processing Workshop (IVMSP). Ed. IEEE. Zagori, Greece: IEEE, 2018. Web. *
Blakeslee, B., R. Ptucha, and A. Savakis. "Faster-ArtCNN: An Extremely Fast Style Transfer Network." Proceedings of the IEEE Western New York Signal and Image Processing Workshop. Ed. IEEE. Rochester, NY: IEEE, 2018. Web. *
Michael Schertzer
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Bernetski, Kimberly A., et al. "Characterization of Electrowetting, Contact Angle Hysteresis, and Adhesion on Digital Microfluidic Devices with Inkjet-printed Electrodes." Microfluidics and Nanofluidics 22. 96 (2018): https://doi.org/10.1007/s10404-018-2119-4. Print. *
Schertzer, Michael J. and Patricia Iglesias. "Meta-Analysis ComparingWettability Parameters and the Effect ofWettability on Friction Coefficient in Lubrication." Lubricants 6. 3 (2018): 1-10. Web. *
Kudtarkar, Kaushik, et al. "Effect of Metallization on the Electromechanical Properties of Microfluidically Synthesized Hydrogel Beads." ASME Journal of Fluids Engineering 141. 3 (2018): 1-6. Print. *
Matczak, Lea, et al. "Effect of Cation Nature on the Lubricating and Physicochemical Properties of Three Ionic Liquids." Tribology International 124. (2018): 23-33. Print. *
Kudtarkar, Kaushik, et al. "Effects of Chemical Composition on the Electromechanical Properties of Microfluidically Synthesized Hydrogel Beads." ASME Journal of Fluids Engineering 140. 10 (2018): 1-6. Print. *
Published Conference Proceedings
Li, Xi, Kara L. Maki, and Michael J. Schertzer. "Preliminary Investigation of the Effect Of Dielectrophoresis on Colloidal Transport and Deposition in Evaporating Droplets." Proceedings of the ASME International Mechanical Engineering Conference & Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web. *
Patricia Taboada-Serrano
Associate Professor
Chemical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Li, Xiang, et al. "Titanium dioxide nanotubes as model system for electrosorption studies." Nanomaterials 8. 404 (2018): 1-13. Web. ˜
Ney, Evan, Chia-Hung Hou, and Patricia Taboada-Serrano. "Electrical double layer potential inside nanopores from Classic Electrodynamics and Grand Canonical Monte Carlo simulations." ACS Journal of Chemical and Engineering Data 63. (2018): 2557-2566. Print. ∆ ˜
Brian Thorn
Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Tornese, Fabiana, et al. "Investigating the Environmental and Economic Impact of Loading Conditions and Repositioning Strategies for Pallet Pooling Providers." Journal of Cleaner Production 172. (2018): 155-168. Print. *
Book Chapter
Gnoni, Maria Grazia, et al. "A Measurement Tool for Circular Economy Practices: a Case Study in Pallet Supply Chains." Progress in Material Handling Research. Ed. E. Ballot, et al. Savannah, Georgia: Digital Commons at Georgia Southern, 2018. 12. Web. £
Tornese, Fabiana, et al. "Improving the Environmental Sustainability of Pallet Logistics Through Preemptive Remanufacturing: an Integer Linear Optimization Model." Progress in Material Handling Research. Ed. E. Ballot, et al. Savannah, Ga: Digital Commons at Georgia Southern, 2018. 2. Web. £
Gill Tsouri
Professor
Electrical and Microelectronic Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Dautov, R., C. Savur, and G. R. Tsouri. "On the Effect of Face Detection Frequency on Heart Rate Estimation in Videoplethysmography." Proceedings of the Western New York Image and Signal Processing Workshop (WNYIPW). Ed. IEEE. Rochester, NY: IEEE, Print. *
Provisional Patent
Tsouri, G. R.. "Opportunistic Plethysmography using Video Cameras." U.S. Provisional Patent Application Provisional. 1 Mar. 2018.
Full Patent
Tsouri, G. R.. "Opportunistic Plethysmography using Video Cameras." U.S. Patent PCT/US2019/017174. 8 Feb. 2019. *
P Venkataraman
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Venkataraman, P. "DETC2018-85103, Data Clustering Using the Natural Bezier Functions." Proceedings of the 38th Computers and Information in Engineering. Ed. ASME. Quebec City, Canada: ASME, 2018. Print. «
Steven Weinstein
Professor
Chemical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Beachley, R., et al. "Accurate Closed-form Trajectories of Light Around a Kerr Black Hole Using Asymptotic Approximates." Classical and Quantum Gravity 35. (2018): 20500: 1-28. Print. £