Faculty Scholarship 2014
Mechanical Engineering
To view listing from a different department, select department name from the right.Wael Abdel Samad
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Samad, W. A. and R. E. Rowlands. "Full-Field Thermoelastic Stress Analysis of a Finite Structure Containing an Irregularly-Shaped Hole." Experimental Mechanics 54. 3 (2014): 457-469. Print. *
Samad, W. A. and R. E. Rowlands. "Hybrid Thermoelastic Stress Analysis of a Pinned Joint." Experimental Mechanics 54. 4 (2014): 515-525. Print. *
Published Conference Proceedings
Samad, W. A. and R. E. Rowlands. "Stress Analysis of a Metal-Plate-Connection in a Beam Under 3-Point-Bending Using Digital Image Correlation." Proceedings of the SEM Annual Conference & Exposition. Ed. Helena Jin, et al. Lombard, Illinois: Springer International Publishing, 2014. Print. *
Samad, W. A. and R. E. Rowlands. "Hybrid Thermoelastic Analysis of an Unsymmetrically-Loaded Structure Containing an Arbitrarily-Shaped Cutout." Proceedings of the SEM Annual Conference & Exposition. Ed. Marco Rossi, et al. Lombard, IL: Springer International Publishing, 2014. Print. *
Invited Paper
Lin, S. J., et al. "Hybrid Thermoelastic Stress Analysis." Experimental Mechanics. (2014). Web. *
Margaret Bailey
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Full Length Book
Moran, Michael J., et al. Fundamentals of Engineering Thermodynamics. 8 ed. New York, NY: John Wiley & Sons, Inc., 2014. Print. ˜
Journal Paper
Raelin, Joseph A., et al. "The Gendered Effect of Cooperative Education, Contextual Support, and Self-Efficacy on Undergraduate Retention." Journal of Engineering Education 103. 4 (2014): 599-624. Print. «
Raelin, Joseph A., et al. "The Gendered Effect of Cooperative Education, Contecxtual Support, and Self-Efficacy on Undergraduate Retention." Journal of Engineering Education 103. 4 (2014): 599-624. Print. «
Invited Paper
Raelin, Joseph A., et al. "The Effect of Cooperative Education, Contextual Support, and Self-Efficacy on Male and Female Student Retention." ASEE Conference Proceedings. (2014). Print. «
Invited Article/Publication
Mason, Sharon, et al. "Institutional Transformation at a Large Private Technical University: Reporting on the Accomplishments of a Combined Data Driven Top-Down and Bottom-Up Approach." IEEE Frontiers in Education Conference Proceedings. (2014). Print. «
Muckel, Ryan and Margaret Bailey. "Combining Thermodynamics and Public Policy: Exploring the Benefits of this Alternative Instructional Method." IEEE Frontiers in Education Conference Proceedings. (2014). Print. «
Stephen Boedo
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Demiri, S., S. Boedo, and L.S. Holsen. "Wear Characteristics of Large Aspect Ratio Silicon Microbearing Systems." Wear 312. (2014): 58-69. Print. * £
Boedo, S. and J.F. Booker. "A Novel Elastic Squeeze Film Total Hip Replacement." ASME Journal of Tribology 136. (2014): 11101. Print. * £
Published Conference Proceedings
Coots, S.A. and S. Boedo. "Wear Assessment of a Novel Squeeze-Film Artificial Hip Joint." Proceedings of the 2014 Effective Access Technology Conference, Rochester, NY, June 17-18, 2014. Ed. RIT. Rochester, NY: n.p., Print. *
Invited Keynote/Presentation
Coots, S.A. and S. Boedo. "Wear Assessment of a Novel Squeeze-Film Artificial Hip Joint." 2014 Effective Access Technology Conference. RIT. Rochester, NY. 17 Jun. 2014. Conference Presentation. ∆
Boedo, S. and J.F. Booker. "A Novel Elastic Squeeze Film Total Hip Replacement." University Technology Showcase, Center for Emerging and Innovative Sciences (CEIS). RIT. Rochester, NY. 10 Apr. 2014. Conference Presentation. ∆
Steven Day
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Lillie, Jeffrey S., et al. "Pulse Wave Velocity Prediction and Compliance Assessment in Elastic Arterial Segments." Cardiovascular Engineering and Technology. (2014): forthcoming. Web. «
Tartakoff, Joseph, Coley Duncan, and Steven W Day. "Component Validation of a High Power Transcutaneous Energy Transfer System." Journal of Medical Devices - Transactions of the ASME 8. 2 (2014): 1-2. Print. *
Varbe, Nicole, et al. "In Vitro Hemodynamic Model of the Arm Arteriovenous Circulation to Study Hemodynamics of Native Arteriovenous Fistula and the Distal Revascularization and Interval Ligation Procedure." Journal of Vascular Surgery 59. 5 (2014): 1410-1417. Print. *
Invited Keynote/Presentation
Tchantchaleishvili, Vakhtang, Steven Day, and H Todd Massey. "Left Ventricular End-diastolic Pressure-dependent Passive and Active Flow Adjustment Scheme in Continuous-flow Left Ventricular Assist Devices." 60th Annual Meeting of ASAIO. ASAIO. Washington, DC. 20 Jun. 2014. Conference Presentation.
Ke Du
Research Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Ding, Junjun, et al. "Transfer patterning of large-area graphene nanomesh via holographic lithography and plasma etching." Journal of Vacuum Science and Technology B. (2014): 06FF01-1. Print. *
Du, Ke, et al. "Fabrication of polymer nanowires via maskless O2 plasma etching." Nanotechnology. (2014): 165301. Print. *
Mel, Abdel-Aziz El, et al. "Electron Beam Nanosculpting of Kirkendall Oxide Nanochannels." ACS Nano. (2014): 1854-1861. Print. *
Hany Ghoneim
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Invited Keynote/Presentation
Yin, Z. and Ghoneim H. "Pumping Potential of a Flexible-Matrix-Composite Structure with Negative Poisson's Ratio." First International Conference on Mechanics of Composites. Stony Brook University. Long Island, New York. 19 Jun. 2014. Conference Presentation. *
Amitabha Ghosh
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Published Conference Proceedings
M, Schertzer,, et al. "Effect of Office Hour Participation on Student Performance." Proceedings of the International Mechanical Engineering Congress & Exposition. Ed. ASME. Montreal, Quebec, CA: ASME, 2014. Print. £
Pantaleon, Carlos and Amitabha Ghosh. "Applications of Isogeometric Analysis Coupled with Finite Volume Method." Proceedings of the 2014 AIAA Region I Student Conference. Ed. AIAA. Ithaca, NY: AIAA, 2014. Print. £
Mario Gomes
Principal Lecturer
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Artusio-Glimpse, A., et al. "Rocking Motion of an Optical Wing: Theory." Applied Optics 53. 31 (2014): 11-19. Print. *
Published Conference Proceedings
Figliotti, Matt and Mario W. Gomes. "A Variable-Inertia Flywheel Model for Regenerative Braking on a Bicycle." Proceedings of the ASME 2014 Dynamics Systems and Controls Conference (DSCC'14). Ed. Jingang Yi. Austin, TX: n.p., Web. *
Gosavi, Shriya and Mario W. Gomes. "Power Production for a Small-Scale Experimental Hydrokite System." Proceedings of the International Conference of Control, Dynamic Systems, and Robotics (CDSR'14). Ed. Davide Spinello. Ottawa, Ontario, CA: n.p., 2014. Web. *
Douglas, Matt and Mario W. Gomes. "Dynamics of a River Kite Power Production System with a Kinetic Energy Storage Device." Proceedings of the International Conference of Control, Dynamic Systems, and Robotics (CDSR'14). Ed. Davide Spinello. Ottawa, Ontario, CA: n.p., 2014. Web. *
Ramesh, Ashwin and Mario W. Gomes. "Power Generation for a Tethered Wing with a Variable Tether Length." Proceedings of the International Conference of Control, Dynamic Systems, and Robotics (CDSR'14). Ed. Davide Spinello. Ottawa, Ontario, CA: n.p., 2014. Web. *
Vardhan, Saloni and Mario W. Gomes. "Dynamic Analysis of a Rimless Wheel on Randomly Generated Rough Terrain." Proceedings of the International Conference of Control, Dynamic Systems, and Robotics (CDSR'14). Ed. Davide Spinello. Ottawa, Ontario, CA: n.p., 2014. Web. *
Ahlin, Konrad and Mario W. Gomes. "Quantifying Frictional Losses for a 2-Degree-of-Freedom Energy-Efficient Walking Robot." Proceedings of the International Conference of Control, Dynamic Systems, and Robotics (CDSR'14). Ed. Davide Spinello. Ottawa, Ontario, CA: n.p., 2014. Web. *
Surendra Gupta
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Published Conference Proceedings
Gupta, S. K., et al. "Transfer Student Pipeline to Engineering & Engineering Technology Programs." Proceedings of the 2014 ASEE Annual Conference. Ed. American Society for Engineering Education. Indianapolis, IN: American Society for Engineering Education, 2014. Web. «
Victoria, Patricia Iglesias, et al. "Microstructural Characterization of Sm-Co Magnets." Proceedings of the 2014 International Mechanical Engineering Congress & Exposition. Ed. The American Society of Mechanical Engineers. Montreal, Canada: The American Society of Mechanical Engineers, 2014. Web. «
Edward Hensel Jr.
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Published Conference Proceedings
Hensel, E.C. and R.J. Robinson. "Direct Assessment of Student Learning Outcomes by Analysis of Performance Evaluation of Student Employees." Proceedings of the Twelfth LACCEI Latin American and Caribbean Conference for Engineering and Technology (LACCEI2014). Ed. LACCEI. Guayaquil, Ecuador: LACCEI, 2014. Web. *
Schertzer, M., et al. "Effect Of Office Hour Participation On Student Performance." Proceedings of the ASME IMECE 2014 Annual Conference and Exposition. Montreal, CA: ASME, 2014. Web. *
Robinson, R. J., et al. "Understanding The Causes For Low Student Office Hour Attendance." Proceedings of the ASME IMECE 2014 Annual Conference and Exposition. Montreal, Canada: ASME, 2014. Web. *
Invited Keynote/Presentation
Robinson, Dr. Risa, et al. "Mechanical Models for Determining Electronic Cigarette Exposure." Electronic Cigarettes and the Public Health: A Public Workshop. US FDA Center for Tobacco Products, Department of Health and Human Services. Washington, DC. 10 Dec. 2014. Lecture. ∆
Patricia Iglesias Victoria
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Published Conference Proceedings
Iglesias, Patricia, et al. "Microstructural Characterization of Sm-Co Magnets." Proceedings of the ASME 2014 International Mechanical Engineering Conference & Exposition IMECE2014. Ed. American Society of Mechanical Engineers. Montreal, Quebec: n.p., Web. ˜
Schertzer, Michael J., et al. "Enhancement of the Thermo-Fluid Measurement Laboratory for Semester Conversion." Proceedings of the 121st ASEE Annual Conference & Exposition. Ed. American Society for Engineering Education. Washington, DC: n.p., Web. *
Shows/Exhibits/Installations
Behm, Tae Oh, Patricia Iglesias, Gary. Designing and Developing an Innovative Smart Cane for People who are Blind and Deaf-Blind. By Tae Oh, Patricia Iglesias, and Gary Behm. 20 Oct. 2014. 16th International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS 2014), Rochester. Exhibit.
Invited Keynote/Presentation
Iglesias, Patricia, et al. "Protic and Aprotic Ionic Liquids." 69th Society of Tribologist and Lubrication Engineers Annual Meeting. STLE. Orlando, Florida. 18 May 2014. Conference Presentation.
Satish Kandlikar
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Full Length Book
Kandlikar, S. G., et al. Heat Transfer and Fluid Flow in Minichannels and Microchannels. 2nd ed. Rochester, NY: Elsevier, 2014. Print.
Hayner, C.H., M. E. Steinke, and S.G. Kandlikar. Contemporary Perspectives on Liquid Cold Plate Design: Design and Manufacturing Liquid Cooled Heat Sinks for Electronics Cooling. Rochester, NY: Begell House, 2014. Print.
Journal Paper
Banerjee, R and S.G. Kandlikar. "Liquid Water Quantification in the Cathode Side Gas Channels of a Proton Exchange Membrane Fuel Cell Through Two-Phase Flow Visualization." Journal of Power Sources. 247 (2014): 9-19. Print. *
Banerjee, R and S.G. Kandlikar. "Experimental Investigation of Two-Phase Flow Pressure Drop Transients in Polymer Electrolyte Membrane Fuel Cell Reactant Channels and Their Impact on the Cell Performance." Journal of Power Sources. 268 (2014): 194-203. Print. *
Bhavnani, S, et al. "Boiling Augmentation with Micro/Nanostructured Surfaces: Current Status and Research Outlook." Nanoscale and Microscale Thermophysical Engineering. 18 (2014): 197-222. Print. *
Gopalan, P and S.G. Kandlikar. "Modeling Dynamic Interaction Between an Emerging Water Droplet and the Sidewall of a Trapezoidal Channel." Colloids and Surfaces A: Physicochemical and Engineering Aspects. 441 (2014): 262-275. Print. *
Gopalan, P and S.G. Kandlikar. "Effect of Channel Materials and Trapezoidal Corner Angles on Emerging Droplet Behavior in Proton Exchange Membrane Fuel Cell Gas Channels." Journal of Power Sources. 248 (2014): 230-238. Print. *
Gopalan, P and S.G. Kandlikar. "Contact Line Characteristics of Liquid-Gas Interfaces Over Grooved Surfaces." Microfluidics and Nanofluidics 16. 6 (2014): 999-1008. Print. *
A, Kalani, and Kandlikar, S. G. "Evaluation of Pressure Drop Performance During Enhanced Flow Boiling in Open Microchannels With Tapered Manifolds." Journal of Heat Transfer 136. 5 (2014): 1-7. Print. *
Kandlikar, S. G. "Review and Projections of Integrated Cooling Systems for Three-Dimensional Integrated Circuits." Journal of Electronic Packaging 136. 2 (2014): 1-11. Print. *
Kandlikar, S. G., et al. "Two-Phase Flow in GDL and Reactant Channels of a Proton Exchange Membrane Fuel Cell." International Journal of Hydrogen Energy 39. 12 (2014): 6620-6636. Print. *
Li, Z, and S.G. Kandlikar. "Current Status and Future Trends in Data Center Cooling Technologies." Heat Transfer Engineering. (2014) Print. *
T.Y., Lin,, et al. "An Experimental Investigation on Friction Characteristics and Heat Transfer of Air and CO2 Flow in Microtubes With Structured Surface Roughness,." Heat Transfer Engineering 35. 2 (2014): 021007-1 - 021007-11. Print. *
Patil, C. M. and S.G. Kandlikar. "Review of the Manufacturing Techniques for Porous Surfaces Used in Enhanced Pool Boiling." Heat Transfer Engineering 35. 10 (2014): 887-902. Print. *
Patil, C. M., K. S. V. Santhanam, and S.G. Kandlikar. "Development of a Two-step Electrodeposition Process for Enhancing Pool Boiling." International Journal of Heat Mass Transfer. 79 (2014): 989-1001. Print. *
Patil, C. M. and S.G. Kandlikar. "Pool Boiling Enhancement through Microporous Coatings Selectively Electrodeposited on Fin Tops of Open Microchannels." International Journal of Heat Mass Transfer. 79 (2014): 816-828. Print. *
Kandlikar, S. G. "Design Considerations for Cooling High Heat Flux IC Chips with Microchannels." IEEE DESIGN & TEST 31. 4 (2014): 43-50. Print. *
R, Banerjee, and Kandlikar, S. G. "Two-phase pressure drop response during load transients in a PEMFC,." Int. J. Hydrog. Energy. 39(33) (2014): 19079-19086. Print. *
Banerjee, R, et al. "Experimental Validation of Two-phase Pressure Drop Multiplier as a Diagnostic Tool for Characterizing PEM Fuel Cell Performance." International Journal of Hydrogen Energy 39. 31 (2014): 17791-17801. Print. *
Banerjee, R and S.G. Kandlikar. "Two-phase Pressure Drop Response During Load Transients in a PEMFC." International Journal of Hydrogen Energy 39. 33 (2014): 19079-19086. Print. *
Banerjee, R, et al. "Experimental Validation of Two-phase Pressure Drop Multiplier as a Diagnostic Tool for Characterizing PEM Fuel Cell Performance." International Journal of Hydrogen Energy 39. 31 (2014): 17791-17801. Print. *
Banerjee, R and S.G. Kandlikar. "Experimental Investigation of Two-Phase Pressure Drop Transients in Polymer Electrolyte Membrane Fuel Cell Reactant Channels and Their Impact on the Cell Performance." Journal of Power Sources 268. (2014): 194-203. Print. *
Kanaris, Athanasios G., et al. "Comparing the Mixing Performance of Common Types of Chaotic Micromixers: A Numerical Study." Heat Transfer Engineering 36(13). (2014): 1122—1131. Print. *
Li, Zhen and Satish G Kandlikar. "Current Status and Future Trends in Data-Center Cooling Technologies." Heat Transfer Engineering 36(6). (2014): 523-538. Print. *
Book Chapter
Kandlikar, S. G. "Preface." Heat Transfer and Fluid Flow in Minichannels and Microchannels. Rochester, NY: Elsevier, 2014. prefact. Print. *
Published Conference Proceedings
Kalani, A and S.G. Kandlikar. "Pressure Drop Analysis Using the Homogeneous Model for Open Microchannel with Manifold (OMM)." Proceedings of the ASME 2014 12th International Conference on Nanochannels, Microchannels and Minichannels. Ed. Unknown. Chicago, IL: n.p., 2014. Print. *
Banerjee, R and S.G. Kandlikar. "Two Phase Pressure Drop Characteristics During Low Temperature Transients in PEMFCS." Proceedings of the ASME 2014 12th International Conference on Nanochannels, Microchannels and Minichannels. Ed. Unknown. Chicago, IL: n.p., 2014. Print. *
Invited Keynote/Presentation
Kandlikar, S.G. "Microscale Transport From Electronics Cooling to Fuel Cells." Invited Talk, Graduate Seminar Speaker. Ohio State University. Columbus, OH. 21 Mar. 2014. Keynote Speech. *
Kandlikar, S.G. "Transport Phenomenon at Microscale From Electronics Cooling to Fuel Cells." Mechanical and Aerospace Graduate Seminar Speaker. University of Texas. Arlington, TX. 10 Apr. 2014. Keynote Speech.
Kandlikar, S.G. "Advances and Opportunities in Microscale Transport Research." Tsinghua University. Department of Mechanical Engineering. Beijing, China. 6 May 2014. Guest Lecture.
Kandlikar, S.G. "Pool Boiling on Multiscale Surface Features." International Heat Transfer Symposium. International Heat Transfer Symposium. Bejing, China. 6 May 2014. Guest Lecture.
Kandlikar, S.G. "Revival of Pool Boiling for High Heat Flux Dissipation." IEEE ITHERM 2014 Conference. IEEE ITHERM 2014 Conference. Orlando, Florida. 27 May 2014. Conference Presentation.
Kandlikar, S.G. "Recent Advances in Pool Boiling Heat transfer with Micro- and Nanostructures." INTEL Corp. INTEL Corp. Phoeniz, AZ. 4 Sep. 2014. Keynote Speech.
Kandlikar, S.G. "Recent Advances in Pool Boiling Heat transfer with Micro- and Nanostructures." Graduate Seminar Presentation. Arizona State University. Tempe, Arizona. 5 Sep. 2014. Keynote Speech.
Kandlikar,, . "Cooling Options for 3D-IC Cooling." IEEE Electronics Packaging Symposium. Binghamton Unviersity. Binghamton, New York. 8 Oct. 2014. Keynote Speech.
Kandlikar, S.G. "Hydrogen Economy and Recent Developments in Automotive Fuel Cells." Hydrogen Properties Research Center. Kyushu University. Fukuoka, Japan. 23 Oct. 2014. Keynote Speech.
Kandlikar, S.G. "Professor Shoji's Outstanding Contributions and Our Current Understanding of Boiling Phenomena." Invited Seminar at Boiling Workshop. Phase Change Research Committee of Thermal Engineering Division of JSME. Tokyo, Japan. 25 Oct. 2014. Keynote Speech.
Kandlikar, S.G. "Microscale Transport From Fuel Cells to Electronics Cooling." MEM Seminar. Drexel University. Philadelphia, PA. 10 Apr. 2014. Keynote Speech.
Invited Article/Publication
Koz, M and S.G. Kandlikar. "The Effect of Injection and Suction on the Interfacial Mass Transport Resistance in a Proton Exchange Membrane Fuel Cell Air Channel." Proceedings of the 12th International Conference on Nanochannels, Microchannels, and Minichannels. (2014). Print. *
Raghupathi, P. and S. Kandlikar. "Evaporation Momentum Force on a Bubble Under Asymmetric Temperature Condition." International Mechanical Engineering Conference and Exposition. (2014). Print. *
Jason Kolodziej
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Chirico, Anthony J. III and Jason R. Kolodziej. "Data-Driven Methodology for Fault Detection in Electromechanical Actuators." ASME J. Dyn. Sys., Meas., Control 136. 4 (2014): 1-16. Print. *
Guerra, Christopher J. and Jason R. Kolodziej. "Data-Driven Approach for Condition Monitoring of Reciprocating Compressor Valves." ASME J. Eng. Gas Turbines Power 136. 4 (2014): 1-13. Print. *
Published Conference Proceedings
Rana, Rohit, Karl Q. Schwarz, and Jason R. Kolodziej. "Non-Invasive Fault Detection in an Axial Flow Blood Pump Used as a Ventricle Assistive Device." Proceedings of the ASME Dynamic Systems and Control Conference. Ed. ASME. San Antonio, TX: ASME, 2014. Print. *
Kathleen Lamkin-Kennard
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Published Conference Proceedings
Lamkin-Kennard, Kathleen, et al. "Design of a Wearable Electroactive Polymer Biosensor." Proceedings of the Effective Access Technology Conference, Rochester, NY. Ed. RIT. Rochester, NY: n.p., 2014. Web. £
Green, Jared, Elizabeth Debartolo, and Kathleen Lamkin-Kennard. "Characterization of Gait Patterns in Common Gait Rehabilitation Exercises." Proceedings of the Effective Access Technology Conference, Rochester, NY. Ed. RIT. Rochester, NY: n.p., 2014. Web. £
Provisional Patent
Sullivan, Christopher, Elizabeth Debartolo, and Kathleen Lamkin-Kennard. "Method and System for Monitoring Terrain and Gait and Predicting Upcoming Terrain." Patent US 20140180173 A1. 26 Jun. 2014.
Invited Keynote/Presentation
Lamkin-Kennard, Kathleen. "An Interactive Flipped Classroom Approach for Teaching Biomaterials." Provost Learning and Innovation Grant Showcawse. RIT. Rochester, NY. 19 Nov. 2014. Conference Presentation.
National/International Competition Award Winner
Wrisley, Seaver, et al. ASME Robotics and Mechanisms. Undergraduate Robotic Design Competition 1st Place. Buffalo, NY, 2014. *
Alexander Liberson
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Lillie, Jeffrey, et al. "Pulse Wave Velocity Prediction and Compliance Assessment in Elastic Arterial Segments." Cardiovascular Engineering and Technology. (2014): 10. Print. *
Liberson, Alexander S, Jeffrey S Lillie, and David A Borkholder. "Numerical Solution for the Boussinesq Type Models with Applications to Arterial Flow." Journal of Fluid Flow, Heat and Mass Transfer 1. (2014): 9-15. Print. *
Published Conference Proceedings
Liberson, Alexander S and Jeffrey S Lillie. "Shock Capturing Numerical Solutionfor the Boussinesq Type Models with Application to Arterial Flow." Proceedings of the International Conference on New Trends in Transport Phenomena. Ed. Boguslaw Kruczek. Ottawa, Ontario: n.p., 2014. Web. * «
Risa Robinson
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Robinson, Risa, et al. "Determination of Nicotine Content and Delivery in Disposable Electronic Cigarettes by GC-MS." Nicotine and Tobacco Research NTR-2014. (2015): 752. Print. *
Published Conference Proceedings
Hensel, Edward and Risa Robinson. "Direct Assessment of Student Learning Outcomes by Analysis of Performance Evaluation of Student Employees." Proceedings of the Excellence in Engineering to Enhance a Country’s Productivity: Twelfth LACCEI Latin American and Caribbean Conference for Engineering and Technology. Ed. LACCEI. Guayaquil, Ecuador: n.p., 2014. Print. *
Hensel, Edward and Risa Robinson. "Direct Assessment of Student Learning Outcomes by Analysis of Performance Evaluation of Student Employees." Proceedings of the Excellence in Engineering to Enhance a Country’s Productivity: Twelfth LACCEI Latin American and Caribbean Conference for Engineering and Technology. Ed. LACCEI. Guayaquil, Ecuador: n.p., 2014. Print. *
Schertzer, Michael J., et al. "Effect of Office Hour Participation on Student Performance." Proceedings of the ASME 2014 International Mechanical Engineering Conference & Exposition (MECE2014). Ed. ASME. Montreal, Quebec, CANADA: n.p., 2014. Print. *
Robinson, Risa, et al. "Understanding the Causes for Low Student Office Hour Attendance." Proceedings of the ASME 2014 International Mechanical Engineering Conference & Exposition (IMECE2014). Ed. ASME. Montreal, Quebec, CANADA: n.p., 2014. Print. *
Invited Keynote/Presentation
Robinson, Risa, et al. "Mechanical Models for Determining Electronic Cigarette Exposure." Electronic Cigarettes and the Public Health: A Public Workshop, US FDA Center for Tobacco Products Department of Health and Human Services. FDA. Washington, DC. 10 Dec. 2014. Conference Presentation. ∆
Michael Schertzer
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Published Conference Proceedings
Schertzer, Michael J., et al. "Characterization of Bead Based Chemical Reactions and Supernatant Dillution in Digital Microfluidic Devices." Proceedings of the 2nd Middle East Conference on Biomedical Engineering. Ed. Reza Tafreshi, Texas A&M University at Qatar. Doha, Qatar, NA: n.p., 2014. Web. *
Schertzer, Michael J., et al. "Enhancement of the Engineering Measurements Laboratory for Semester Conversion." Proceedings of the ASEE National Conference 2014. Ed. Mark Matthews. Indianapolis, IN: n.p., 2014. Web. «
Robinson, Risa, et al. "Understanding The Causes For Low Student Office Hour Attendance." Proceedings of the ASME International Mechanical Engineering Conference and Exposition. Ed. Assimina Pelegri. Montreal, QC: n.p., 2014. Web. *
Schertzer, Michael J., et al. "Effect of Office Hour Participation on Student Performance." Proceedings of the ASME International Mechanical Engineering Conference and Exposition. Ed. Assimina Pelegri. Montreal, QC: n.p., 2014. Web. *
Blume, Steffen, et al. "Analytical Models to Determine the Electric Field Characteristic of a Multi-Electrode Impedimetric Immunosensor in a Digital Microfluidic Device." Proceedings of the ASME International Mechanical Engineering Conference and Exposition. Ed. Assimina Pelegri. Montreal, QC: n.p., 2014. Web. *
Dunning, Peter D., Pierre E. Sullivan, and Michael J. Schertzer. "Method for Characterization of Passive Mechanical Filtration of Particles in Digital Microfluidic Devices." Proceedings of the ASME International Mechanical Engineering Conference and Exposition. Ed. Assimina Pelegri. Montreal, QC: n.p., 2014. Web. *
Schertzer, Michael J., et al. "Effect of surface modification on protein deposition in desiccated droplets." Proceedings of the ASME International Mechanical Engineering Conference and Exposition. Ed. Assimina Pelegri. Montreal, QC: n.p., 2014. Web. *
Michael Schrlau
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Golshadi, Masoud, et al. "Effects of Synthesis Parameters on Carbon Nanotubes Manufactured by Template-based Chemical Vapor Deposition." Carbon 80. (2014): 28-39. Print. *
Provisional Patent
Bau, Haim H. and Michael G. Schrlau. "Multiplexed Nanoscale Electrochemical Sensor for Multi-analyte Detection." Patent US 8,877,518 B2. 4 Nov. 2014.
Robert Stevens
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Stevens, Robert J., Steven J. Weinstein, and Karuna S. Koppula. "Theoretical Limits of Thermoelectric Power Generation from Exhaust Gases." Applied Energy 133. 15 (2014): 80-88. Print. *
Pierce, Reginald D. and Robert J. Stevens. "Experimental Comparison of Thermoelectric Module Characterization Methods." Journal of Electronic Materials 44. 6 (2015): 1796-1802. Print. *
Benjamin Varela
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Journal Paper
Gonzalez, Veleria Adriana, Benjamin Varela, and Voelkel Joseph. "Factors Affecting the Setting Time and Compressive Strength of Alkali Activated Granulated Blast Furnace Slag." International Journal of Innovative Engineering and Technology 3. 10 (2014): 23-28. Web. £
Waldron, Ashley and Benjamin Varela. "Experimental Investigation of Micro-reinforced Alkali-activated Ground Granulated Blast Furnace Slag with Wollastonite." International Journal of Research in Engineering and Technology 3. 13 (2014): 82-88. Web. *
Pablo, Santizo-Matheuatheu, Ashley Waldron, and Benjamin Varela. "Optimization of Alkali Activation of Ground Granulated Slag with Mining Tails." International Journal of Research in Engineering and Technology 3. 13 (2014): 109-113. Web. *
Book Chapter
Provis, John, et al. "Durability Testing-physical Processes." Alkali Activated Materials: State of then Art report. Ed. John Provis and Jannie van Deventer. New York, NY: Springer, 2014. 277-308. Print. £
Published Conference Proceedings
Gonzalez, Valeria, Benjamin Varela, and Joseph Voelkel. "Analysis of Compressive Strength and Setting Time of Alkali Activated Slag Binders." Proceedings of the Non-Traditional Cement and Concrete V. Ed. Vlastimil Bilek and Zbynek Kersner. Brno, Czech Republic: Brno University of Technology, 2014. Print. *
Santizo-Matheu, Pablo, Ashley Waldron, and Benjamin Varela. "Optimization of Alkali Activation of Ground Granulated Slag with Mining Tails." Proceedings of the Non-Traditional Cement and Concrete V. Ed. Vlastimil Bilek and Zbynek Kersner. Brno, Czech Republic: Brno University of Technology, 2014. Print. *
Waldron, Ashley and Benjamin Varela. "Experimental Investigation of Micro-reinforced Alkali Activated Ground Granulated Blast Furnace Slag with Wollastonite." Proceedings of the Non-Traditional Cement and Concrete V. Ed. Vlastimil Bilek and Zbynek Kersner. Brno, Czech Republic: Brno University of Technology, 2014. Print. *
P Venkataraman
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2014 Submissions
Published Conference Proceedings
Venkataraman, P. "Continuous Solution of Partial Differential Equations on Non-rectangular and Non-continuous Geometry." Proceedings of the 34th Computers in Engineering. Ed. ASME. Buffalo, NY: ASME, Print. «